Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

D22 radio cover plate ?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 98
Joined: Thu May 01, 2008 4:37 pm
Location: goatsasspass

D22 radio cover plate ?

Post by hollywood »

gday guys this thing is doing my head in i need to get that cheezy silver cover off around my radio on the dash of my nissan d22 dualcab 4x4 so i can try to fit my uhf in the spare hole underneath the radio i can find only 2 screws to take out but thats it surely it cant be that hard does any know how its done please any one cheers steve. :oops:
i dont naturaly look this bad work done it to me
Top
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Post by joshy »

ive done it, was a while ago now tho. but from memory it was just the two screws that you undo from underneath and then u just pull it off. sorry dont have the nav here to double check
Top
Posts: 98
Joined: Thu May 01, 2008 4:37 pm
Location: goatsasspass

d22

Post by hollywood »

tried that bit scared to pull to hard feels like it wants to break
i dont naturaly look this bad work done it to me
Top
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Post by joshy »

dont just pull from 1 spot, work your way around
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

take the whole front centre surround off.
a couple screws midway then unclip 2 clips right at the bottom. bit of a trick to finding them and poping them out. then pull bottom of the surround and it should come off.
then its 4 screw beside the radiowick will allow the radio and and plastic cubourd/cup holders to come out together.

hopefully your UHF has screw locations on the side of it so it can screw straight to the bracket.
Top
Posts: 29
Joined: Wed Apr 09, 2008 4:51 pm
Location: Gold Coast

Post by waxhead. »

correct.
Top
Posts: 98
Joined: Thu May 01, 2008 4:37 pm
Location: goatsasspass

d22

Post by hollywood »

cup holders ?.. its a D22 no cup holders in that surround not sure u guys on the same wave length u sure
i dont naturaly look this bad work done it to me
Top
Posts: 1124
Joined: Fri Aug 03, 2007 4:14 pm
Location: Douglas park

Post by joshy »

i think we were one of the few markets to not get the cup holders..the rest sounds rite
Top
Posts: 1256
Joined: Mon Jun 19, 2006 7:05 pm
Location: newzealand

Post by tweak'e »

cup holders where an optoin and fitted in the other din location.

i only have bottom model ute so it doesn't come with them :(
Top
Posts: 98
Joined: Thu May 01, 2008 4:37 pm
Location: goatsasspass

d22

Post by hollywood »

so i take the screws out and just yank is that it
i dont naturaly look this bad work done it to me
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 5 guests