Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

WHERE TO FILL GQ TD42 GEARBOX??

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
Posts: 137
Joined: Wed Jan 30, 2008 6:00 pm
Location: Neverbinere

WHERE TO FILL GQ TD42 GEARBOX??

Post by adriand82 »

hey, i need to change the gearbox oil in my 92 LWB td42, and was wondering where to actually fill the oil from?? any help appreciated :)
Last edited by adriand82 on Sun Jun 22, 2008 1:58 pm, edited 1 time in total.
Posts: 1187
Joined: Sat Nov 01, 2003 5:05 pm
Location: melbourne, Knoxfield

Post by matthewK »

fill hole is on the passenger side ??? im pritty sure,
1995 land rover disco on 265 muddies
Posts: 378
Joined: Tue Nov 02, 2004 8:54 pm
Location: blue mountians

Post by superzuki »

yea theres a filler plug on the side. you need a pump. or you can take the gear shifter boot off and use a funnel and a hose to fill it.
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

wrong thread, my bad, filler is on drivers side, either get those 1 litre bottles that u can squeeze, or use a funnel and a hose.

cheers, andrew
Last edited by love ke70 on Sun Jun 22, 2008 4:09 pm, edited 1 time in total.
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Posts: 137
Joined: Wed Jan 30, 2008 6:00 pm
Location: Neverbinere

Post by adriand82 »

thanks for the speedy reply guys, much appreciated. the drainplug was on the drivers side. used a funnel and hose, worked a treat. had a notchy 4th change when hot, so got some castrol vmx80 and mixed in the correct amount of lucas stabilizer (25%) and it now changes smooth as.
Post Reply

Who is online

Users browsing this forum: No registered users and 64 guests