Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Do they have a web site

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 49
Joined: Mon May 05, 2008 3:43 pm
Location: eltham

Do they have a web site

Post by rockit »

Does anybody no if aus 4wd have a web site i cant seem to find it.
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Re: Do they have a web site

Post by weeman »

rockit wrote:Does anybody no if aus 4wd have a web site i cant seem to find it.
nah its shut down...

he cant be bothered with it.
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
Posts: 49
Joined: Mon May 05, 2008 3:43 pm
Location: eltham

re:aus 4wd

Post by rockit »

oh the shop or his web site
Top
Posts: 618
Joined: Sun Mar 05, 2006 2:19 pm
Location: wakka wakka land

Contact:
Contact weeman

Re: re:aus 4wd

Post by weeman »

rockit wrote:oh the shop or his web site
website yes..

He still does some after hours work from the shop....
For all your HID and LED stuff
http://offroadindustries.com.au/

Check us out on Facebook for weekly specials
www.facebook.com/pages/Offroad-Industries/137501182955527
Top
Posts: 49
Joined: Mon May 05, 2008 3:43 pm
Location: eltham

re:aus 4wd

Post by rockit »

no worries thanks mate, you dont have a number by chance do ya
Top
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Post by macneil »

does he still make tube bars?
Top
Posts: 198
Joined: Fri Sep 21, 2007 8:17 am
Location: melbourne

Post by icrawl »

ring him" sandy bowman" at hall 4x4 wreakers malvern st bayswater not sure of the number
Top
Posts: 409
Joined: Thu Mar 20, 2008 7:43 am
Location: Aus

Post by macneil »

ah i didnt no he was at hall.. only just round the corner..
Top
Posts: 632
Joined: Wed Sep 07, 2005 8:59 pm
Location: South Gippsland

Post by hiluxmad »

97297566 halls used to spend way too much time and money there
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest