Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

starter motor struggles after long drives

For all things Electrical.

Moderator: -Scott-

Post Reply
Posts: 3
Joined: Sun Mar 25, 2007 7:25 pm

starter motor struggles after long drives

Post by misunderstood »

hey guys,
just a quick question.. (troopy, hj75, 2H)
i seem to have problems starting after longer trips.. short driving around town i always know it will start ok, but a longer trip (maybe 1hr plus?) the starter really struggles to kick over.
i have 2 batteries less than a year old (one close to brand new), new alternator, new regulator, all appear to be working as they should.

any simple ways i can check and be sure its a starter before forking out for a new one? or any idea what part of the starter would be faulty, if i decided to pull it to bits and have a crack at fixing myself?

or if anyone thinks other wise, any other problem it may be?

cheers, pete
Posts: 1005
Joined: Sat Aug 02, 2003 8:34 am
Location: Croydon, Victoria

Post by TRobbo »

So the starter is turning the engine, only more slowly?
Warn - Dont leave home without it
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

Maybe heat from the engine bay
Is the starter near the headers, if so install a heat shield
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Posts: 3
Joined: Sun Mar 25, 2007 7:25 pm

Post by misunderstood »

yeah thats right... it just sounds as though i have a flat battery, and only just managing to turn it over.
headers are on opposite side.. but batteries are close. Would hot batteries maybe give these symptoms?
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

Generally speaking a warm battery will make more charge
Once we were within one crank of a dead battery, alone and over 60km from any help
An hour of the battery in the sun and we were off



Just had a similar prob with the work van and it was the earth from battery to chassis

Sure your alternator is charging right. May be charging just enough for short trips but on long trips it may not be keeping up and thus draining the batteries
Have you got a voltmeter, if so what reading are you getting when the problem occurs?
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Posts: 383
Joined: Fri Jul 15, 2005 7:35 pm
Location: Melbourne Victoria

Post by 84ZOOKSTA »

so after the long drive are you starting it straight away or some time after?

After a short drive are you starting it straight away or waiting some time.

If straight away is an issue but if your waiting it may be another issue?
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
Posts: 190
Joined: Wed May 21, 2008 3:55 pm
Location: Coffs Harbour, NSW

Post by PacMan »

Hi,

your starter motor is worn out.
When the starter gets warm from the engine, the bearings are extending and let him run bad.

New bearings for 10$ and all is fine again.

Greetings
Chris
Posts: 14209
Joined: Sun Jan 11, 2004 11:36 am
Location: Adelaide

Post by -Scott- »

fool_injected wrote:Just had a similar prob with the work van and it was the earth from battery to chassis
This is my first guess - slightly dodgy joint in the starter circuit which goes high resistance when it gets hot.

Disassemble, clean and reassemble all the connections in the starter motor power (high current) circuit. Both +12V side and -ve side.

If that doesn't fix it, PacMan's starter bearings theory would be my second guess.

To be honest, I think both are equally likely - but cleaning connections costs less than replacing bearings. :D
Posts: 3523
Joined: Fri Aug 27, 2004 12:27 am
Location: Fairfield,Sydney

Post by pongo »

My chev used to do this and was ign timing to advanced, Dunno why, but this was the prob.

Not sure if a 2h is a petty, but maybe worth a try
God Of Emo
Posts: 7350
Joined: Sun Aug 24, 2003 7:04 pm
Location: Newy, home of the ZOOK (Rockin the 'diff)

Post by lay80n »

pongo wrote:My chev used to do this and was ign timing to advanced, Dunno why, but this was the prob.

Not sure if a 2h is a petty, but maybe worth a try

2H is diesel.

Check the earths and connetions, as Fool said. Then check your starter motor.

Layto....
[quote="v840"]Just between me and you, I actually really dig the Megatwon, but if anyone asks, I'm going to shitcan it as much as possible! :D[/quote]
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests