Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
light force light and bulbs
Moderator: -Scott-
light force light and bulbs
scored a pair of the smallest light force spotlights(170 i think) from a friend the other day and i went to hook them up and noticed the bulbs were only 75W. is this standard and can i put some phillips 100w bulbs in without ruining the case?
1993 LWB vitara, Front & Rear alloy bars, towbar, spotties, UHF.
Re: light force light and bulbs
The smallest lights are the Lance 140's. They come with the 75 watt bi-pin bulbs. Lightforce do not recommend placing a 100w halogen xeno-phot bulb in due to heat issues. Although, I would have a crack at it if your lights have the aluminium billet heatsink as the bulb base.gumtree wrote:scored a pair of the smallest light force spotlights(170 i think) from a friend the other day and i went to hook them up and noticed the bulbs were only 75W. is this standard and can i put some phillips 100w bulbs in without ruining the case?
If it starts to melt anything, just stop and forget about it.
Bushies: http://www.angelfire.com/on4/bushy5560/ http://www.angelfire.com/on4/bushy5561/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Lightforce HID conversion stuff: http://www.angelfire.com/on4/bushy5551/
Who is online
Users browsing this forum: No registered users and 0 guests