Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

dual transfers

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 41
Joined: Mon Oct 27, 2003 10:03 pm
Location: rockingham wa

dual transfers

Post by daniel1 »

i brought the advanced adapters dual trans kit from marks 4wd, stripped down to fix a oil leak from gear box and the teeth from the coupling in the duals adaptor has worn teeth and the out put shaft which it drives has teeth worn not even 20,000km old any one else have this problem?
Top
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Worn as in mega chewed or you can see some marking on it post up a pic of it.
plenty of parts on the bench
Top
User avatar
DIRTY ROCK STAR
Im here for the sausage!
Posts: 15646
Joined: Wed Sep 24, 2003 7:11 pm
Location: NEWCASTLE

Post by DIRTY ROCK STAR »

bit different, i run dual GQs. the adaptor and dual transfer case kit is Marks. the adaptor kit didnt fit and needed some trimming ofthe input shaft.
put up a photo for everyone to checkout.
but they have copped some flamings on here in the past.
EVERYONE LOVES A 40
www.lovells.com.au
RAW4x4
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests