Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Aisin manual hubs

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Aisin manual hubs

Post by hudson44 »

I have to do my CV boots and 1 joint again after only 14 months. So i'm going to put manual hubs on while i'm at it. Where's the cheapest place to get aisin hubs from? Is it best to go to a wrecker and get some Triton ones or does someone make new ones? I'm located in Melbourne.
Top
Posts: 180
Joined: Wed Aug 18, 2004 7:57 pm
Location: packahoonaham

Post by corkhead »

imlachs wreckers in clayton. i got mine about 3 years ago and havent missed a beat, just clean/grease em after water adventures.
www.victoriancampertrailers.com.au
www.salon13.com.au
Top
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

I got mine from SmartParts and they were excellent to deal with, one phone call, paid for and sent that day, I had them the next. They are in Ballarat so I guess I was lucky.
Top
Posts: 40
Joined: Sun Jul 15, 2007 2:02 pm
Location: Tongarra, near Wollongong, AUS

Post by icemanpaj »

i got mine from central coast 4wd wreckers they have a web site that you can see the car you are getting them off.
mine were off a 92 model triton and are in great condition and they sent them in the mail super quick. give them a call 02 4352 2443 . they are in nsw but that shouldnt be too much of a hassle. www.coast4x4wreckers.com.au
cheers
andrew
Pajero NL 2.8 TD GLX
31x10.5 M/T, ARB BAR, SNORKEL, 150L TANK, B J FLIP, MAN HUBS, PUMPING SUBS, DINTED REAR OVERHANG.
Top
Posts: 1107
Joined: Wed Jul 20, 2005 6:44 pm
Location: Melbourne

Post by hudson44 »

Cheers guys. I ended up going with the AVM ones. Got them at a good price. Did both CV shafts and the hubs today. Hopefully now i won't have to do them in quite a while.
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 1 guest