Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

2.8 hilux, what to do??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Post Reply
Posts: 42
Joined: Wed Apr 16, 2008 1:10 am
Location: Perth

2.8 hilux, what to do??

Post by Grimey »

Hey guys,

My mate and i are going 2 go look at a 96 2.8d lux on the weekend, its done 148000k with the original engine apparently, but wouldnt be suprised if its been rebuilt and hes asking for $10500. My question is, what the FU** do i look out for as problems go, this is my 1st 4wd and diesel so i dont have really any clue what to watch out for and to steer clear from. My mate has a 2003 3l td, but he doesnt know much about the mechanic side either.

What common problems should i look for apart from rust, its been resprayed silver, but the guy reckons it hasnt, that in itself sounds dodgey.

Anyway, any help would be greatly appreciated:)
Posts: 502
Joined: Wed May 02, 2007 3:29 pm
Location: Brackenridge...Boondall at heart

Post by Rory »

take a magnet with u that will be able to tell u if its been bogged up n sprayed for sale... i dont no bout the engine side of it others will, other than that tailshaft unis, noisey box, put it in 4x4 n check for noisey transfer or front diff, cheak the diffs for leaks, just most the other genral maintance things with them
Boondall backyard performance...SHANTYTECH 4034...
BMX bike - 20" maxxis stickies, 4130 tube frame, reduction gears.
Posts: 505
Joined: Wed Jan 25, 2006 9:19 am
Location: to the left of the post

Post by trains »

Service history, ie 5000km oil and filter changes. Very important.


Timing belt, injectors serviced, probably not done, but belt should be done every 100k



The rest of the vehicle is usually pretty good.
Check that the clutch does not slip, at thos kms.

Get a vehicle inspection done by your trusted mechanic if your serious.

Trains
Save the Whales......Collect the whole set.


My Wife Can't Shear..............But You Should See Her Crutch !
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

The 5000km oil change is VERY important- if there isnt clear evidence this has been done, walk away.

The 2.8D's do NOT like long oil intervals- does massive amounts of damage to the big end bearings.

Timing belt done at 100,000kms- The engines are an interferance design (which means if you get a belt snap you get about $3000 worth of "CRUNCH CRUNCH CRUNCH BANG" from under the engine bay.

My 2.8D has done 345,000kms and not missed a beat short of a leaky head gasket at 250,000kms.

Silver was a factory option colour in those vehicles too.
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Posts: 42
Joined: Wed Apr 16, 2008 1:10 am
Location: Perth

Post by Grimey »

http://i283.photobucket.com/albums/kk28 ... 1369_B.jpg

thats it there, i didnt think anyone would go to the trouble of putting those decals on haha, good to know that its standard, but i saw another photo of it from the back, and the Toyota sign thats normally black is silver aswell, is that factory?

How can he prove if hes done the oil changing himself?

cheers for you help and advice
Posts: 84
Joined: Sat Mar 04, 2006 12:26 am
Location: Gold Coast

Post by ChunkyCharcoal »

Looks like a pretty tidy rig.

Check for leaking swivel hub seal. Messy job and not real easy either.
Check for rust under driver and passenger floor mats around the body mounts (lift the plastic plug) Also in rear of cab under mat beside seat.

Regarding the oil change every 5000k's, it is very important but I bought mine and the previous owner said he did oil every 10,000! Definitely worried me but is fine so far...

Seems like a pretty good price for those low k's and age too. Good luck!
90 Turbo Diesel Hilux. F&R air lockers, 4" lift, 30 spline longs, 33"MTZ...
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Grimey wrote:http://i283.photobucket.com/albums/kk28 ... 1369_B.jpg

thats it there, i didnt think anyone would go to the trouble of putting those decals on haha, good to know that its standard, but i saw another photo of it from the back, and the Toyota sign thats normally black is silver aswell, is that factory?

How can he prove if hes done the oil changing himself?

cheers for you help and advice
That style side tray is off a later model hilux. I would say its also had a respray.
Posts: 42
Joined: Wed Apr 16, 2008 1:10 am
Location: Perth

Post by Grimey »

RUFF wrote:
Grimey wrote:http://i283.photobucket.com/albums/kk28 ... 1369_B.jpg

thats it there, i didnt think anyone would go to the trouble of putting those decals on haha, good to know that its standard, but i saw another photo of it from the back, and the Toyota sign thats normally black is silver aswell, is that factory?

How can he prove if hes done the oil changing himself?

cheers for you help and advice
That style side tray is off a later model hilux. I would say its also had a respray.
by saying that, it would have obviously been in an accident, so id have to get the chassis looked at?
Posts: 2404
Joined: Fri Jul 07, 2006 9:00 pm
Location: Ipswich

Post by Sic Lux »

Few things that haven't been mentioned yet the balls in the pitman arm and j arm aren't loose seen a fair few even ones in car yards with roadworthys oil from near harmonic ballance Oil eal bhind timin belt fairly common thing to leak. look at the coulor of the enging bay if it's diffrent it's been resprayed if it the same chances are it's factory paint. Cracked chassis near steering box and front fixed pin running verticaly (front mounting point of front spring) Center bearing in rear tailshaft.
plenty of parts on the bench
Posts: 3224
Joined: Thu Apr 15, 2004 9:36 pm
Location: Lost in the Cleland fog!

Post by ferrit »

thats right- the cracked front spring mount- Mine did this last year, got it welded up easy enough tho
2005 HDJ100 Manual, ARB bar, XD9000 winch, ARB rooftop tent + awning, Drawers, Engel, 2" OME lift, 285/75R16 KM2's, iCom, HID XGT's.
Post Reply

Who is online

Users browsing this forum: No registered users and 42 guests