Hey, i have an '89 samurai with 2" body lift. The fuel tank is still in the factory location, leaving a ~2" gap between it and the floor above it. Would be nice to remove this gap to get the tank up out of the way....
I realise that the tank cannot be simply moved upwards on its mounts, since the filler hose attaches to the bottom of the tank, and would have to go straight through the chassis rail.....
Wondering if anyone has found a similar tank of another vehicle that will fit lifted up a couple of inches?
Or any other solutions?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Moving fuel tanks on samurai/413
I have a carry tank sitting in the garden doing nothing if you want it. PM if interested!
As for lifting the original tank, you can modify the mounts & move it up some more. Mine got to about an inch lift - but the mount hole that you can see in the pic is in the way of the rear tube now. Not sure if we're going to leave it like this, or modify it some more to go a bit higher...
As for lifting the original tank, you can modify the mounts & move it up some more. Mine got to about an inch lift - but the mount hole that you can see in the pic is in the way of the rear tube now. Not sure if we're going to leave it like this, or modify it some more to go a bit higher...
[url=http://www.oceanculture.com]Ocean Culture Sandboards & Gear[/url]
Who is online
Users browsing this forum: No registered users and 3 guests