Hi all
Got a 88 Classic, Ive removed the rear bar to increase departure angle and as a result have been pushing the rear quarter panels up.
No drama except for the Tail Lights that are getting busted as the light sockets get damaged in the holes behind the light assembly.
Question: What are the options in getting LED replacement lights which obviously wont have this problem.
I havn't seen any direct replacments so some custom work I assume is required. Any ideas?
NOTE:Ive thought about cutting the metal out behind the light which will also solve the issue but the tail light is already damaged so figured fix two birds with the one stone.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rangie Classic LED replacment Tail lights?
Moderator: Micka
these are cool
http://db.hella.com.au/cgi-bin/catalogu ... recid=2133
make sure what you get have reflectors in them other wise cops might hassle you
Mick
http://db.hella.com.au/cgi-bin/catalogu ... recid=2133
make sure what you get have reflectors in them other wise cops might hassle you
Mick
TD5 96 Discovery UTE.
Who is online
Users browsing this forum: No registered users and 0 guests