5 lug on 5.5" to 6 lug on 5.5" Adapter

Post by **Pixie-LWBZOOK** » Mon Jul 07, 2008 1:19 pm

I know they are illegal etc. but does anyone know if any Aust company's or distributors stock this style adapter.

http://www.ezaccessory.com/Wheel_Adapte ... 0-6550.htm

Post by **lay80n** » Mon Jul 07, 2008 1:45 pm

Why not just buy new rims, i doubt it will work out much cheaper to buy 4 adapters in Australia (where you may as well double the price of anything you can buy in the states).

Layto....

Post by **Pixie-LWBZOOK** » Mon Jul 07, 2008 1:55 pm

because everyone else in my family has cruisers, so i will be able to use their spare sets of rims/tires.

it is only a once off cost for the spacers/adaptors

Post by **lay80n** » Mon Jul 07, 2008 2:06 pm

Pixie-LWBZOOK wrote:because everyone else in my family has cruisers, so i will be able to use their spare sets of rims/tires.

it is only a once off cost for the spacers/adaptors

Look for some jap import hubs with the 6 stud, like Dee has. That will allow you to fit patrol/cruiser rims without needing spacers. Though the spacers may give you some width.

Those spacers work out at $137 at todays exchange rate ($129US) so for 4 they would most likley be around $300 or so, maybe a bit more, landed. If you look at the prices most places change for normal wheel spacers over here are $160 each and up (snake racing) then going to USA is probably a good bet to save some $$.

Layto....

Post by **skez** » Mon Jul 07, 2008 4:21 pm

any one that makes spacers in aus should be able to make u custom set i got some one off spacers made to suit the rear of an xd falcon with a shortened diff it ended up costing nearly $700 tho and i had to send my mags away so they got them right..

Post by **want33s** » Mon Jul 07, 2008 5:38 pm

How thick do you want the spacers/adaptors?
Jas.

Outer Limits 4x4 Board

5 lug on 5.5" to 6 lug on 5.5" Adapter

5 lug on 5.5" to 6 lug on 5.5" Adapter

Who is online