Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Turbo Question?

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 92
Joined: Mon Apr 28, 2008 4:07 pm
Location: Toowoomba, Australia

Turbo Question?

Post by monkeycritter »

Does anyone know if the compressor housing on a turbo, can be turned around around, let's say 45 deg or 90 deg, from the exhaust housing?

Just curious, as I can get my hand on a TD05, but the compressor housing needs to be moved around 90 deg, so the outlet isn't banging on the exhaust manifold?
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

most can be turned 360 degrees
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 1009
Joined: Wed Jan 19, 2005 11:21 pm
Location: townsville

Post by brad-chevlux »

just be aware of the wastegate acuator, most turbos have them to the either the compressor housing it self or to the bolts that hold the comp housing on.

in either case, you need to make sure moving the housing will not cause problems with the waste gate
http://www.mothfukle-engineering.com/
Top
Posts: 92
Joined: Mon Apr 28, 2008 4:07 pm
Location: Toowoomba, Australia

Post by monkeycritter »

So, If I leave the bracket for the actuator housing in the correct spot, should be apples?

Also, can I put a new actuator on it that operates at a slightly higher boost pressure?
Top
Posts: 898
Joined: Wed Nov 29, 2006 6:16 pm
Location: Melb S/E

Post by NutterGQ »

you can put a new actuator or just use a bleed valve which means you can make a home made boost controller for hi/lo. If the actuator ends up somewhere off you can often make a bracket out of angle iron or similar.
My bitch has boost, Nutter Engineering Turbo GQ
Top
Posts: 92
Joined: Mon Apr 28, 2008 4:07 pm
Location: Toowoomba, Australia

Post by monkeycritter »

Thanks legends!
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 2 guests