Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
welding voltage
Moderators: toaddog, TWISTY, V8Patrol, Moderators
welding voltage
well I finally baught myself a welder after always stealing others. I got it for 40 bucks off ebay. It is a goodwell engineering arc welder made in 1964 and is bloody heavy. it ranges from 30to 130 amps, and I have been practicing all day, and works like a charm. Only question I have is there are two places to connect the electrode lead to. 50 volts (general) and 80Volts (special). What exactly is the difference between welding with 50 volts and 80 volts. when using 80 volts it seems easier to keep the arc going, and i could lay a bead of weld using 30 amps, but with 50 volts I could't keep it going
The higher the volts the higher the "Arc Force" so the more forceful and stable the arc is. If that makes sense.
The overall energy created by the welder is a result of volts and amps more energy = hotter weld.More amps to create more energy = a less stable arc, more volts to create the same energy = a more stable arc.
There will be other repercussions of using volts versus amps to create the necessary energy, a wider weld and less penetration is probably one of them but I would need to check them ATM.
Cheers
The overall energy created by the welder is a result of volts and amps more energy = hotter weld.More amps to create more energy = a less stable arc, more volts to create the same energy = a more stable arc.
There will be other repercussions of using volts versus amps to create the necessary energy, a wider weld and less penetration is probably one of them but I would need to check them ATM.
Cheers
Yes. Literally, power = volts x amps, and the standard way to measure power is literally the amount of energy delivered in a second. Higher power means more energy delivered over the same time.Struth wrote:The overall energy created by the welder is a result of volts and amps more energy = hotter weld.More amps to create more energy = a less stable arc, more volts to create the same energy = a more stable arc.
That's the electrical side. Welding, I know jack sh!t.
yeah ive tried searching google, but all i seem to find is the electrical side of things, I can stil remember that stuff from electrical at uni last year. But when does it benefit when welding ie trying to weld a thick plate at 130 amps, or somthing really thin on the lowest setting, or maybe when welding in wierd angles. It does seem as though it's easier to hold the arc.
The perils of posting pissed.dumbdunce wrote:there's a sig in the making...-Scott- wrote:I know jack sh!t.
A higher voltage will make it easier to strike and maintain the arc, but also means the arc has more power (for a given current) - I guess that means it penetrates better. If so, it's probably better for thick material, but easier to punch through thin material.oops wrote:when does it benefit when welding ie trying to weld a thick plate at 130 amps, or somthing really thin on the lowest setting, or maybe when welding in wierd angles. It does seem as though it's easier to hold the arc.
Or not. I know jack sh!t about welding.
Who is online
Users browsing this forum: No registered users and 149 guests