Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

hub nut

Tech Talk for Rover owners.

Moderator: Micka

Forum rules
Post Reply
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

hub nut

Post by landy_man »

anyone in melbourne know who sells hub nut spanners to suit rangies....called heaps of places and they reckon I'm nuts...
might have to find a socket...what is 2 1/16 " in mm...
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

1 1/16" should be 27mm IIRC repco should have one for around $5
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

2 1/16"
2"=50.8mm
1/16=1.5875mm??
total= 52.3875mm.
i thought 4wd in blackburn rd. sell them. could be wrong??
remove with a chisel and take to a tool shop to size a socket. i have seen one and it looks like a tubesocket if i'mcorrect.
rough rough cheap cheap (bird dog mechanics) :roll:

modman ;)
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

looks like 4wd spares is closed for the holidays...so you reckon a 53mm will fit
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

sorry must have dreaming about not being at work I thought you meant wheel nut for some reason :(

but yes 53mm should do it
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

just make sure you canswap the socket and it does fit over axle and other stuff with the rachet on.

modman ;)
Top
Posts: 157
Joined: Mon Jul 14, 2003 2:12 am
Location: Exmoor England

Post by tony cordell »

52mm is the size you require.

I have one that is 1/2 inch drive that I cut and lengthend so it fits with the 110cv's I have fitted to later narrow hubs with M/D axle sets.
Defender 90 Modified
Defender 110XS Standard

[url=http://www.lr4x4.com]lr4x4.com[/url]
Top
Posts: 510
Joined: Tue Jul 22, 2003 9:42 pm
Location: melbourne

Post by modman »

bootie fab is catching via the web :twisted: :twisted: :twisted:

modman :rofl: :rofl:
Top
Posts: 162
Joined: Mon Apr 14, 2003 12:23 am
Location: Canberra

Post by suzidisco »

All 4x4 spares have the correct tube spanners they are in Newcastle, they were $5 last i saw
02 49571117
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

thanks
Top
Posts: 13
Joined: Wed Dec 31, 2003 12:36 pm
Location: Melbourne

Post by Hardtop_110 »

4 Wheels Drives in Middleborough Road Blackburn has them for $7 or you can borrow mine if you like.

Cheers

Daryl
Daryl Snowdon
Melbourne Australia
1954 86" Series 1 Hardtop - 'under construction'
1993 110" Defender Hardtop
Top
Posts: 1614
Joined: Fri Feb 21, 2003 8:44 pm
Location: Melbourne

Post by landy_man »

thanks daryl... i have striped th axles back as far as I can without undoing the nuts and will go there when they open again
Top
Post Reply

Return to “Rover”

Who is online

Users browsing this forum: No registered users and 0 guests