Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

JD2 Notch master. Upgrade time Thanks PETE

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

JD2 Notch master. Upgrade time Thanks PETE

Post by bru21 »

about to order new bender - model 4.

thought I might get one of the "NOTCH MASTER" notchers at the same time

has anyone used one?

http://www.jd2.com/ under tube notchers.


The beast looks good but might need a few more clamps to hold the tube.

cheers Bru
Last edited by bru21 on Thu Jul 31, 2008 7:35 pm, edited 1 time in total.
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 1039
Joined: Mon Mar 05, 2007 10:28 am
Location: On board the Mothership

Post by Harb »

where did you get the model 4 ?

Want one myself and all the Hydro bits as well......been going to get one for ages, and your posts have stired me up to do it !!
Harb

http://www.4wdmonthly.com.au/shed/index.php?id=2244&im=1
Top
Posts: 2347
Joined: Sat Jan 27, 2007 12:56 pm
Location: Perth

Post by Z()LTAN »

we have used the Jd2 notcher a fair bit.

Its great

have a look at the speedwerx ones though same but cheaper
Locktup4x4.com.au - For all of your hardcore gear

Outlaws4x4.com
Top
Posts: 662
Joined: Thu Jan 23, 2003 8:02 pm
Location: Picton

Post by Tazz »

Have a chat to Pete @ OPW, he's been distributing them here for a while.

Ph No: is in sig line...
Offroad Performance Warehouse
1300 679 494
www.opw.com.au - tazz@opw.com.au
www.jd2.com.au - tazz@jd2.com.au
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

Harb wrote:where did you get the model 4 ?

Want one myself and all the Hydro bits as well......been going to get one for ages, and your posts have stired me up to do it !!
from jd2. $675 freight though!

Really I should just buy a model 3 but I don't want to bolt it down - no where suitable.

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

Z()LTAN wrote:we have used the Jd2 notcher a fair bit.

Its great

have a look at the speedwerx ones though same but cheaper
I had a speedwerx one but am looking at the notch master which is a lot more adjustable (than the jd basic as well)

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

how much is the damage if you don't mind sharing?
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

hey mate I'll pm tonight have quote at home.

don't believe in putting prices on the net for stuff I import. Not fair on other sellers.

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 4275
Joined: Fri Nov 22, 2002 6:41 pm
Location: Western Australia

Post by Hoonz »

thanks mate
H( * )( * )NZ loves B( * )( * )BIES
if a fat lady falls in the forest do the trees laugh?
[quote="RUFF"]although i didnt mean to, i squealed like a girl :armsup:[/quote]
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

Alright, well I made a few changes!!!

I went back and forth with pricing from the states, and at the end of the day decided I would rather have more dies and a tube master notcher than a hydro model 4.

I got a email from Pete from OPW who was at JD2 at the time.

Pete helped me with everything i needed and I ended up deciding to get the whole lot through OPW. This worked out well as I ordered it on tuesday and had it delivered this arvo! Will be easier when i come to get a 2" die soon too!

so i ended up with:

tube master with 3 shafts (so i don't need to remove / destroy the cutter each time.

model 3 bender

1" 3.5CLR
1.5" 4.5CLR
1.37 5.5CLR

so I have enough stuff to build my brothers 4130 tigged Drift cage this weekend.

I would like to thank Pete for his help with answering all my questions and
getting the gear here so fast.

cheers all

Bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests