My Feroza has been having a few problems over the last few weeks. The idle is fluctuating quite a bit but it is also very low and often causes the car to turn off when stopping (at lights or an intersection). If I stop slowly by shifting down through the gears it will be ok (the revs still drop but not enough to stall the car), but if I don't do that then it will stall. This doesn't happen all the time which makes the problem harder to find.
I've noticed that it seems to be related to braking. The harder I brake, the more chance of the car stopping.
I have checked timing and set to factory specs, checked vacuum lines, and cleaned the throttle body (just by spraying carby cleaner into it).
Has anyone else had this problem?
Sandy
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Feroza idle problems
Moderator: Tiny
Check this EFI test and then tell as for any results
http://carl.outerlimits4x4.com/viewtopic.php?t=25064
http://carl.outerlimits4x4.com/viewtopic.php?t=25064
www.ferozaclub.gr
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
[url=http://www.ferozaclub.gr][img]http://i51.photobucket.com/albums/f387/heroicentaur/forum/sign.gif[/img][/url]
Hi,
My battery is fairly new so I don't think thats the problem, and the vacuum advance is hooked up.
I replaced the throttle positioning sensor yesterday and that seems to have improved the problem significantly.
So far the idle only fluctuates a little and usually sits around 800 rpm.
Wheres before it was fluctuating heaps and sitting very low around 400 - 500 rpm.
I will drive it around for a few days and see if anything changes.
My battery is fairly new so I don't think thats the problem, and the vacuum advance is hooked up.
I replaced the throttle positioning sensor yesterday and that seems to have improved the problem significantly.
So far the idle only fluctuates a little and usually sits around 800 rpm.
Wheres before it was fluctuating heaps and sitting very low around 400 - 500 rpm.
I will drive it around for a few days and see if anything changes.
Who is online
Users browsing this forum: No registered users and 0 guests