Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

fixing interior body rust

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 48
Joined: Wed Apr 05, 2006 12:27 am
Location: Brisbane

fixing interior body rust

Post by robjohno »

hey i have removed all the carpet and underlay out of my swb gq/safari. there is a about 30cm x 30cm area of surface rust at the rear between the barn doors and the fuel tank acess hole. would any of you know of a procedure using a sander/grinder and off the shelf products from repco/supercrap that would be best to fix this in a day/weekend

Rob
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Use a wire wheel on a grinder to remove the bulk of the rust then apply a rust treatment/converter. Follow the instructions on the converter and then prime and paint.
Jas.
Top
Posts: 48
Joined: Wed Apr 05, 2006 12:27 am
Location: Brisbane

Post by robjohno »

thanks Jas off to get stuff now and fix the camal up
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 146 guests