any body done this??? is the offset rear diff center going to cause probs?
cheers for any help
dave
before any body asks iv got cruiser diffs sitting around and want somting stronger in my lux
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series cruzer diffs into a hilux
Moderators: toaddog, Elmo, DUDELUX
60 series cruzer diffs into a hilux
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
You could always go GQs. They have a centred rear pumpkin like the hilux and are heaps stronger and fairly cheap too.
Alternatively you could just get some longs for your existing lux diffs and probably never have to worry about them again, a lot easier than the engineering headaches associated with a diff swap.
Alternatively you could just get some longs for your existing lux diffs and probably never have to worry about them again, a lot easier than the engineering headaches associated with a diff swap.
|^^^^^^^^^^^^^^| ||
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
|.........SUZUKI..........| ||'|";, ____.
|_..._..._______===|=||_|__|..., ]
(@)'(@)"""''"**|(@)(@)*****''(@)
yah thought of that just sold off a heap of parts to pay bills and still have the cruiser diffs so was going to use them as i already had them.
just sold gq diffs and my spare lux diff...... blew up my front diff on mon....
just sold gq diffs and my spare lux diff...... blew up my front diff on mon....
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Works a treat , no problems with vibrations, pumpkin is in the same position as the front diff which is a bonus when offroading on ruff stuff and it is way stronger than the 8" grenade that used to live under my Hilux.
I would advise to do the 10mm mod to the axle's though.
I would advise to do the 10mm mod to the axle's though.
Cheers
Andrew
----------------------
Just a few mods, nothing over the top.:)
Andrew
----------------------
Just a few mods, nothing over the top.:)
Who is online
Users browsing this forum: No registered users and 2 guests