Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

need diesel injectors looked at

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

need diesel injectors looked at

Post by UrbanRedneck »

Just need to know if anyone can recomend somewhere around the dandenong area to get my injectors looked at.
She is a little smokey at idle smells like a refinery and is chewin the juice.
Its a RD28t if that helps.

Cheers Damo
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

Anyone?
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 522
Joined: Sat Jan 29, 2005 7:40 am
Location: Melbourne, Vic

Post by Toy80Diesel »

Have you tried MTQ or AXT?
Shut Up, Get Out, & Start Digging...
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: need diesel injectors looked at

Post by bogged »

UrbanRedneck wrote:Just need to know if anyone can recomend somewhere around the dandenong area to get my injectors looked at.
She is a little smokey at idle smells like a refinery and is chewin the juice.
Its a RD28t if that helps.

Cheers Damo
BJ Diesel still on greens Road??
http://www.bjdiesel.com.au/
Failing that, go see Andy at Diesel tec in Lilydale. Im in langwarrin and thats where Im happy to go for great work.
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

Heard alot of good things about diesel tech so might head out there.
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 108
Joined: Sun Sep 26, 2004 8:50 pm

Post by ads80 »

ag diesels westall rd clayton. had very good service there
80 series with chrome wheelnuts !!
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

UrbanRedneck wrote:Heard alot of good things about diesel tech so might head out there.
http://www.diesel-tec.com.au/contact.htm
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

Thanx for your help guys i ended up going to bjdiesels and found one of my old mates works there anyway long story short needed 6 injectors which cost me $514 changeover :cry:
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 522
Joined: Sat Jan 29, 2005 7:40 am
Location: Melbourne, Vic

Post by Toy80Diesel »

UrbanRedneck wrote:Thanx for your help guys i ended up going to bjdiesels and found one of my old mates works there anyway long story short needed 6 injectors which cost me $514 changeover :cry:
Yeah but..... How much better does the truck run now?
Shut Up, Get Out, & Start Digging...
Top
Posts: 289
Joined: Mon May 29, 2006 8:27 pm
Location: carrum downs

Post by UrbanRedneck »

Toy80Diesel wrote:
UrbanRedneck wrote:Thanx for your help guys i ended up going to bjdiesels and found one of my old mates works there anyway long story short needed 6 injectors which cost me $514 changeover :cry:
Yeah but..... How much better does the truck run now?
I must say it was definately worth it atleast at the moment it doesnt smoke at idle and the raw diesel smell has gone yet to see about economy and it starts bit better from stone cold aswell.
have grinder will fit
www.4Bfabrications.com.au
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

UrbanRedneck wrote:... yet to see about economy .
that will come better without doubt :)
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 3 guests