Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Coil spacers????

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 4
Joined: Sat Jul 19, 2008 7:39 pm
Location: Victoria

Coil spacers????

Post by boost-6 »

Hi Guys

I Own a 96 swb vitara I was Wanting 2 put Coil spacers On my zook to give it More height...what size do i put On front/rear as Ive Heard That The vitara Has A 2:1 ratio on coil at front..Im just wondering if i put 15mm spacer in front..30mm in rear will that sit level..?????

Cheers Troy
Top
Posts: 51
Joined: Sun Jan 20, 2008 7:30 am
Location: bellingen(coffsharbour)

Post by sally_o »

yeh thats what i was told but ended up going for 30mm front and rear as i figgerd that it would settle beter when i put a bar and winch on and it was good,even better when i put the winch and bar on.i already had a 1 inch OME lift.all works well get a heaps better ride and 2 extra inches.
Top
Posts: 1048
Joined: Sat Jul 17, 2004 9:48 am
Location: Waikerie; SA

Post by Eddy »

All in here dude!
http://www.outerlimits4x4.com/PHP_Modul ... c48779.php
'03 Mazda Bravo Plus
'80 Datto 720 Ute
'77 Leyland Terrier Truck ... yes a real truck
Top
Posts: 445
Joined: Mon Feb 11, 2008 9:54 pm
Location: Perth

Post by PCRman »

Is any one on OL currently making 15mm front coil spacers for LWB vitara's?

Are suzisport ones as good as any other.
Top
Posts: 223
Joined: Sat Sep 27, 2003 5:10 pm
Location: NW Sydney, NSW

Lift ratio

Post by Impulsive »

The lift ratio on the front of Vitaras is more like 1.75:1
1998 Vitara Hard Top 2.0 EFI
65mm springs (by Allsprings)
35mm body lift
Rancho RS9000's
235's on 15in alloys
Flipped strut mounts
Top
Posts: 5
Joined: Thu Jul 24, 2008 6:40 am
Location: united kingdom

Post by generation-x »

PCRman wrote:Is any one on OL currently making 15mm front coil spacers for LWB vitara's?

Are suzisport ones as good as any other.
hi m8 dont if this is of any use
http://stores.ebay.co.uk/Bits4Vits_Susp ... idZ2QQtZkm

simon
Top
Posts: 255
Joined: Mon Jan 21, 2008 2:22 pm
Location: Brisbane

Post by Bruceh »

I supply spring spacers for lots of different 4wds.
PM me if you need any more info.
I have been selling spacers for quite a few years. I run a business and manufacture polyurethane parts in Brisbane.
"Team Casper"
Go the mighty Zook
The only motor sport we spend money on to go slower.
Top
Posts: 71
Joined: Sat Aug 04, 2007 8:38 pm
Location: Sydney

Post by spzook »

i put 15mm spacers on front and 30mm on the back of my 93 LWB and it sat level. I grabbed them on ebay for about $130ish for the set.
Top
Posts: 51
Joined: Sun Jan 20, 2008 7:30 am
Location: bellingen(coffsharbour)

Post by sally_o »

guys at ARB got mine through big balls motor sports. cost me $140,that was for 30mm front and rear.
Top
Posts: 163
Joined: Wed Mar 08, 2006 1:51 pm
Location: Ballarat

Post by monkeyplex »

I would highly recommend Bruce, He did mine for my vit, shipped them down to victoria. Good price too (thanks bruce). I put 40mm in the back and 20mm in the front, probably would have put 30 mm up front in hindsight. I wacked them in and have had no dramas at all! And if you are planning on putting them in yourself, trust me and save yourself some stress and get some snap-ring pliers to slip the right drive shaft out at the front end to get enough droop to squeeze the spacer in, and have a few assorted jacks and a mate to help. But dont let that deter you, its a very easy job.
=/_____________\=
/[__\\___S___//__]\
|-----------------------|
I--------[vitara]------I
I___I'''''''''''''''''''''I___I
Top
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Spring clamps my friends, spring clamps
;)
Top
Posts: 163
Joined: Wed Mar 08, 2006 1:51 pm
Location: Ballarat

Post by monkeyplex »

Yeah, that would be easier. I was too lazy to get some. Go figure
=/_____________\=
/[__\\___S___//__]\
|-----------------------|
I--------[vitara]------I
I___I'''''''''''''''''''''I___I
Top
Posts: 255
Joined: Mon Jan 21, 2008 2:22 pm
Location: Brisbane

Post by Bruceh »

monkeyplex wrote:I would highly recommend Bruce, He did mine for my vit, shipped them down to victoria. Good price too (thanks bruce). I put 40mm in the back and 20mm in the front, probably would have put 30 mm up front in hindsight. I wacked them in and have had no dramas at all! And if you are planning on putting them in yourself, trust me and save yourself some stress and get some snap-ring pliers to slip the right drive shaft out at the front end to get enough droop to squeeze the spacer in, and have a few assorted jacks and a mate to help. But dont let that deter you, its a very easy job.
Thanks for the plug mate. ;)
"Team Casper"
Go the mighty Zook
The only motor sport we spend money on to go slower.
Top
Posts: 376
Joined: Tue Oct 10, 2006 12:25 pm
Location: bris

Contact:
Contact fordy1

Post by fordy1 »

yes but he wants 10 spacers that also cup the spring!!
www.outdoorauto.com.au - we love doing new GVs....
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 0 guests