maybe thinking of doing it just a 2inch lift is all,would love to know what has to be done to acheive it eg, extend anything like shifters ,breaklines radiator hoses etc? ill make up some brackets to lift bullbar and ill have to extend transfer lever as the f78's are damn small , any one got any pics of it done , i already checked the faqs and noones asked this before ,
cheers for any info
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
f78 rocky bodylift
Moderator: Tiny
There is a bit of stuffing around with shifters, fuel filler lines, bumpers some vacuum lines, radiator hoses and steering column if you go too high, but all can be overcome eventually.
Bullbar AND rear bumper will need to be moved up to suit the lift.
The big question is, why do you want the extra bodylift? You can't go and fit 33" tyres due to the crappy gearing, so I can't see much point.
The only real advantage would be to drop the suspension lift back to normal height, and use the body lift as the ONLY form of lift, as your IFS would function much better.
You also need engineering for a bodylift.
Bullbar AND rear bumper will need to be moved up to suit the lift.
The big question is, why do you want the extra bodylift? You can't go and fit 33" tyres due to the crappy gearing, so I can't see much point.
The only real advantage would be to drop the suspension lift back to normal height, and use the body lift as the ONLY form of lift, as your IFS would function much better.
You also need engineering for a bodylift.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
thats exactly my prob man , last few beach trips bottom of dune i hit it then bang stupid noise , so even with torsion bars wound up still smacks it well thats crap, got an email back from 4wdsystems, and apart from bull bar ,rear bar and transfer lever , he reckons that brake lines should be fine and that only other modification would be the bottom of fan shroud, so still thinkn bout it but if i could sort the prob out another way thatd be great. would after market torsion bars help?
Not really, you don't gain any more travel with HD torsion bars. The only thing is they have a heavier spring rate, would COULD stop it from compressing up as far, but not likely.kemal wrote: would after market torsion bars help?
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
I have aftermarket FEROZA torsion bars ( and I've never seen any current references to Daihatsu bars for ANY model ) and it simply makes a stockie stiffer.
Mine are fitted for VERY specific reasons and if done to a stockie would simply result in a harsher ride and a postponement of the inevitable "bang"...
Not really a solution and I'd be surprised if you could still get them.
Fix the problem....
Mine are fitted for VERY specific reasons and if done to a stockie would simply result in a harsher ride and a postponement of the inevitable "bang"...
Not really a solution and I'd be surprised if you could still get them.
Fix the problem....
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
Then you have four options - Bodylift, ball joint spacing, bump stop spacing or different wheel offsets
Bodylift is the quickest in some ways except for visual stuff like bumpers etc etc...
Personally I'd keep it to a minimum, remove one of the torsion bars and jack the wheel up to see exactly how much interference there is. Don't forget the top bump stop will compress very heavily so need to make a generous allowance for it.
Ball joint spacing is more "professional" and gives you more ground clearance but will probably be limited to around 20+ mm which may not be enough and its more difficult to do without some basic workshop facilities.
Bump stop spacing moves the top bump stop down ( limits upwards movement ) and thus avoids the problem. Probably usefull if the wheels only just touch. You loose bump travel however, but this isnt as detrimental to off road performance as loosing droop travel.
Changing the wheel offset will move the whells out and away from the inner guard - but it reqires spacers ( which IMO are VERY UNSATISFACTORY ) or different wheels or mods to your existing if they are steel.
Bodylift is the quickest in some ways except for visual stuff like bumpers etc etc...
Personally I'd keep it to a minimum, remove one of the torsion bars and jack the wheel up to see exactly how much interference there is. Don't forget the top bump stop will compress very heavily so need to make a generous allowance for it.
Ball joint spacing is more "professional" and gives you more ground clearance but will probably be limited to around 20+ mm which may not be enough and its more difficult to do without some basic workshop facilities.
Bump stop spacing moves the top bump stop down ( limits upwards movement ) and thus avoids the problem. Probably usefull if the wheels only just touch. You loose bump travel however, but this isnt as detrimental to off road performance as loosing droop travel.
Changing the wheel offset will move the whells out and away from the inner guard - but it reqires spacers ( which IMO are VERY UNSATISFACTORY ) or different wheels or mods to your existing if they are steel.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
I use -23mm wheels and it hits on the inside of the flare, so spacing outwards is not an option for curing a rubbage issue.
Contacting on the inner guard is a good effort, mine didn't seem to go close at all when I had stock wheels on.
Contacting on the inner guard is a good effort, mine didn't seem to go close at all when I had stock wheels on.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Easiest option is to put up with itkemal wrote:mmm loads of options i see,
Extending bump stops is by far the easiest option, but you will limit the amount of uptravel you are getting.
I've looked at the ball joints on the Rocky's and don't think it is easy or possible to flip or space them very easily.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Who is online
Users browsing this forum: No registered users and 3 guests