Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

generator + welder help.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 524
Joined: Thu Apr 28, 2005 10:54 am
Location: (rushcreek) north brisbane

generator + welder help.

Post by bigmick »

can i run my welder off a generator.
i have got no idea never had any thing to do with them before.
im guessing i need one that has a 15 amp out put as my welder has a 15 amp plug or can i just get a new power point.
this is my welder:
http://www.weldmaster.com.au/products-d ... 10&pid=312

would something like this work:
http://cgi.ebay.com.au/GENERATOR-DIESEL ... dZViewItem
any one tried these cheap gennies.

any help muchly appreciated.
thanx
mick
zook
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

That generator should be fine but the welder only has a 10 minute duty cycle meaning that at full load it is only good for 10 minutes every hour.
Something to think about.
Jas.
Top
Posts: 524
Joined: Thu Apr 28, 2005 10:54 am
Location: (rushcreek) north brisbane

Post by bigmick »

all ready have welder.
duty cycle is constant. i dont usualy hold the trigger in for more than 10 mins. :D
so do you think the genny would be ok.
any ones oppinions.
cheers jas.
mick
zook
Top
Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

welder will... sorry should have a min./rec. kva input.....

for the ones that i run at work.. the small ones are 5.5kva to run just one kempi miniark 180.... runs allday no trouble at all.. ;)
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 0 guests