ok so my cooler for the auto is being fitted as we speak, pretty sure its off a disco (forgot to take a pic) cylinderical type about 3" or so dia, and fits the width of a fender radiator - mounted in front of though.
Question, never had an auto but been wheeling with a few and have noted theat their autos do get hot at times, should i be looking at running dual coolers? probably don't want to fork out for a fancy custom alloy number.
motor will be 4.4 V8, running 35's.
cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Cooler for ZF? 1 or 2?
Moderator: Micka
I'm running a fresh 3.5 with a ZF and VC, and occasionally 31's. Never had the auto light turn on, it been a great to me. And I have the cylindrical type cooler across my radiator.
If your going to use a second hand cooler just make sure it's not blocked and clean inside.
The Owner's Manual does suggest that if the light does turn on (hot auto) select a higher gear/lower rpm.
Good Luck
If your going to use a second hand cooler just make sure it's not blocked and clean inside.
The Owner's Manual does suggest that if the light does turn on (hot auto) select a higher gear/lower rpm.
Good Luck
Andrzej
Who is online
Users browsing this forum: No registered users and 1 guest