Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BODY LIFT

Tech Talk for Ford, Mazda, Daihatsu & Makes that currently dont have a home.

Moderator: Tiny

Forum rules
Post Reply
Posts: 101
Joined: Tue May 20, 2008 11:12 am
Location: Penrith

BODY LIFT

Post by phraze84 »

im looking at getting a 2" lift...

should i get metal blocks or the polywhateverthane ones???
I got a sweater for Christmas... I wanted a screamer or a moaner!
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

From a functional point of view it doesn't matter IMO.

If its going to be engineered then best to check with the engineer as IIRC metal is required.

Personally I have plastic and its been fine.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Posts: 105
Joined: Mon Mar 01, 2004 9:22 pm
Location: Brisbane

Post by Jimmy L »

I'd say the poly is the go. I did one about 4 years ago and it was awesome. At the time I asked around there was a fair amount of different advice floating around.
89 Narrow CracK Feroza EL- X
2001 NM Pajero Exceed 3.5V6
Coming Soon 2010 Defender 90
Top
Posts: 101
Joined: Tue May 20, 2008 11:12 am
Location: Penrith

Post by phraze84 »

Won’t be engineered...

A few mates said that the poly is crap coz they get damaged easily & can break?

I think if I manage to break a block I deserve it
I got a sweater for Christmas... I wanted a screamer or a moaner!
Top
Posts: 3099
Joined: Wed Dec 11, 2002 10:55 am
Location: Central Queensland

Post by BundyRumandCoke »

I've had red poly (of all things cut down poly boat rollers) on my Rocky for about 10 years now, with absolutely no problems whatsoever. Lift is around 2 1/2 inches.
Mud makes excellent toothpaste.
Top
Posts: 2297
Joined: Mon Mar 06, 2006 1:23 pm
Location: Melbourne-Australia

Post by MightyMouse »

I'm using Acetal.... which is not brittle, but I'm sure its not all that important.

I'd steer away form the really soft plastics like polyurethane however.
( usual disclaimers )

It seemed like a much better idea when I started it than it does now.
Top
Post Reply

Return to “Ford / Mazda / Daihatsu / Homeless”

Who is online

Users browsing this forum: No registered users and 15 guests