Had it seize up on me today, had to change over to a spare one so I could get started. But now I'm stuck with a different key for ignition to the door locks.
I can't seem to find any way to pull the actual barrel apart to change the guts outta it. Would a locksmith do this sorta thing, can it even be done - switch one key thingo into a different barrel? Is it expensive?
Or do I just put up with 2 keys
And, how illegal is it to have the car just wired up to a switch for when I inevitably get sick of loosing my second key?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Ignition barell
Moderator: Tiny
Ignition barell
60 + Turbo, 33"s :armsup:
I sprayed a heap of WD40 in there, jiggled it around a played with it for ages, got it to turn once and thought great, I fixed it. Then turned it back to the lock position and that's where it stayed.
So I'm thinking even if I could get it freely moving again, I'd be a bit concerned about it locking up again at some inconvenient time.
So I'm thinking even if I could get it freely moving again, I'd be a bit concerned about it locking up again at some inconvenient time.
60 + Turbo, 33"s :armsup:
Who is online
Users browsing this forum: No registered users and 1 guest