ive managed to snap the main shaft in my thomas pto winch head this is the 2nd one ive see this happen to i have a spare but its already twisted at the keyway
sooo im wanting to get a stronger one made outta some high tensile steel or something
its 32mm in diameter 495mm long with 4 keyways 30mmx9mm and 50mmx9mm 2 at each end more mesurments if someone needs them
anyone know somewhere in melbourne that could machine this for me
i will be contacting powauto in dandenong tomorrow to price a new one through them
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
thomas pto winch main shaft where to get made
Moderators: toaddog, Elmo, DUDELUX
powauto 147 greens road dandenong
very helpfull
there new shaft is actually a high tensile or something so they claim but they said the older winches its common to twist the shaft but mainly when there used hydraulicly
so $285 for the shaft
i also brought new keyways as mine where twisted slightly
and new seals and gaskets ill also replace the bearings but im sure i can get them cheaper from a local bearing joint
very helpfull
there new shaft is actually a high tensile or something so they claim but they said the older winches its common to twist the shaft but mainly when there used hydraulicly
so $285 for the shaft
i also brought new keyways as mine where twisted slightly
and new seals and gaskets ill also replace the bearings but im sure i can get them cheaper from a local bearing joint
Who is online
Users browsing this forum: No registered users and 0 guests