Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

44"s on ifs!!!

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 728
Joined: Sun Aug 24, 2003 8:46 pm
Location: Canberra (too far from the sea)

44"s on ifs!!!

Post by twinnie »

by now a few of you (and most of them being victorians) would know the truck i am speacking of the question is why? surly you would go though diffs and axels pritty quick. mabey its just a display truck like the one next to it. if any one is still mystafied i'm talking about the 4x4 heven hilux.

Matt
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

PICS
Top
Posts: 728
Joined: Sun Aug 24, 2003 8:46 pm
Location: Canberra (too far from the sea)

Post by twinnie »

aaahh see i do have pics but they are on film and so i'll be finishing that film at the summer nats (i'm going to enter the photo comp) so they'll be a few weeks and by then ppl will have lost interist in this thread. :cry:

Matt
Top
Posts: 2944
Joined: Tue Feb 11, 2003 5:47 pm
Location: Manjimup, Western Australia

Contact:
Contact ausyota

Post by ausyota »

Hmmm...
Id like to see how long the Idler arm in the poxy IFS steering holds up to a 44.
R.I.P Brock Fontanini 28-3-06 - 16-2-08
www.teamcarnage.net
Top
Posts: 2817
Joined: Fri Feb 21, 2003 10:10 pm
Location: Hellbourne again

Post by bigsteve »

I've seen it dirty b4 but never being driven, I thought they were smaller than 44's, I think they are Ground Hawgs aren't they??
yeshemesh
Top
User avatar
Surfection
Minion #1
Posts: 1151
Joined: Fri Oct 25, 2002 8:18 pm
Location: Wollongong

Contact:
Contact Surfection

Post by Surfection »

Yeah they looked like 40 inch ground hawgs to me yesterday when we drove past on the highway....for 500 bucks why the hell wouldn't they throw a SAS under there :roll:
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Surfection wrote:for 500 bucks why the hell wouldn't they throw a SAS under there :roll:



:roll: :roll:
Top
User avatar
Surfection
Minion #1
Posts: 1151
Joined: Fri Oct 25, 2002 8:18 pm
Location: Wollongong

Contact:
Contact Surfection

Post by Surfection »

RUFF wrote:
Surfection wrote:for 500 bucks why the hell wouldn't they throw a SAS under there :roll:



:roll: :roll:


Ummm yeah ??? They're a 4wd modification workshop..... 200 for the front axle, they've got the steering box right there already, tie rod/drag link wouldn't cost $hit, shocks $200 for NEW ones, cheaper for second handies, shock mounts out of scrap/cheap as chips plate/pipe, and 100 to get the shaft lengthened or they could make up a spacer for f&%k all. Some rear springs might set them back 50 bucks or whatever.

i don't see the problem !!
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Surfection wrote:
RUFF wrote:
Surfection wrote:for 500 bucks why the hell wouldn't they throw a SAS under there :roll:



:roll: :roll:


Ummm yeah ??? They're a 4wd modification workshop..... 200 for the front axle, they've got the steering box right there already, tie rod/drag link wouldn't cost $hit, shocks $200 for NEW ones, cheaper for second handies, shock mounts out of scrap/cheap as chips plate/pipe, and 100 to get the shaft lengthened or they could make up a spacer for f&%k all. Some rear springs might set them back 50 bucks or whatever.

i don't see the problem !!


Nor did i before you did your surf.
Top
User avatar
Surfection
Minion #1
Posts: 1151
Joined: Fri Oct 25, 2002 8:18 pm
Location: Wollongong

Contact:
Contact Surfection

Post by Surfection »

:cry: Lets not go there.... if i had of listened to you and others and put leaves under it in the first place i would have been wheeling it for 2 years now. And dayum i'd have much less debt to worry about !! :lol:
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Surfection wrote::cry: Lets not go there.... if i had of listened to you and others and put leaves under it in the first place i would have been wheeling it for 2 years now. And dayum i'd have much less debt to worry about !! :lol:


Now you know why i went :roll: :roll: :D
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

But i just hope we learn from our mistakes i know i have. I would never have touched my dual cab if i had planned to be where i am now with it. It prob owes me around 30Grand+ and i could build it now for around 10.
Top
User avatar
Surfection
Minion #1
Posts: 1151
Joined: Fri Oct 25, 2002 8:18 pm
Location: Wollongong

Contact:
Contact Surfection

Post by Surfection »

RUFF wrote:But i just hope we learn from our mistakes i know i have. I would never have touched my dual cab if i had planned to be where i am now with it. It prob owes me around 30Grand+ and i could build it now for around 10.


Ken oath dude... i'm with you all the way. Unfortunatly us young guys tend to not listen to those who obviously know better than us and insist on doing things our own way. :cry: I've learnt the hard way but i've definatly learned, the rangie is gonna be kept simple as and very low !! :)
Top
Posts: 2384
Joined: Mon Mar 31, 2003 10:05 am
Location: Brisbane or 169.254.243.241

Post by RaginRover »

RUFF wrote:But i just hope we learn from our mistakes i know i have. I would never have touched my dual cab if i had planned to be where i am now with it. It prob owes me around 30Grand+ and i could build it now for around 10.


Out of interest mate did you get the 3.9 running well or are you still having timing issues ?

Tom
Top
Posts: 16934
Joined: Sun Oct 20, 2002 6:57 pm

Post by RUFF »

Yeah its Fine Tom the Vac Advance was RS. I just need to replace it.
Top
Posts: 99
Joined: Thu Jul 10, 2003 10:49 pm

Post by MAV-RIK »

Ive seen this ute(4WD Heaven Hilux)close up and the tyres are 44/18.5/15's on what looks like 15x12in alloy rims.
I spoke to the guy in there and its powered by a 308 backed with a T700 4 speed trans and is for sale for around 26 large as is or 20 no wheels.Mav
Top
Posts: 278
Joined: Sat Sep 27, 2003 4:17 pm
Location: Central Coast NSW

44 ifs

Post by big38l »

i think this is it.....
85 4SKINNER , totally stock.(Lie ;-) )

Black Chevy Blazer 454 big block , broken diff (True :-( )
Top
Posts: 2031
Joined: Tue Oct 22, 2002 10:49 am
Location: On a mission...

Post by Damo »

MAV-RIK wrote:Ive seen this ute(4WD Heaven Hilux)close up and the tyres are 44/18.5/15's on what looks like 15x12in alloy rims.
I spoke to the guy in there and its powered by a 308 backed with a T700 4 speed trans and is for sale for around 26 large as is or 20 no wheels.Mav


$26k? oooh pick me! pick me!


:roll:
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest