Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

clutch troubles

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Post Reply
jap
Posts: 42
Joined: Tue Jan 15, 2008 12:47 pm
Location: brisbane

clutch troubles

Post by jap »

Hi there hoping someone can tell me having issues with my clutch it seems air is getting into the system when i place my ear near the clutch petal i can hear a small pist coming from that area so i had a better look and notice that the rubber boot there was all torn is this a problem or could it be the master that is stuffed and quick anwsers would be great cheers
peter
Posts: 306
Joined: Wed Dec 05, 2007 12:32 am
Location: brisbane

Post by frby69 »

hi if it's wet around the boot on inside near pedal mine did that and it was a simple fix master rebuild seal kit from autobarn less then $30 if i remembed as i replaced the whoile slave as well from memory there is 2 diff kits for gq
http://photobucket.com/frby69
jap
Posts: 42
Joined: Tue Jan 15, 2008 12:47 pm
Location: brisbane

Post by jap »

can you recall if one came with the rubber boot in it as i need a new one as well
Posts: 306
Joined: Wed Dec 05, 2007 12:32 am
Location: brisbane

Post by frby69 »

it did just rang auto barn $20 for the one thats not vucum assist was very easy repair was pain in butt bleeding and shit again but not that hard

oh i have a 4.2 petrol 91model
http://photobucket.com/frby69
jap
Posts: 42
Joined: Tue Jan 15, 2008 12:47 pm
Location: brisbane

Post by jap »

cheers thanks for the info going to pull it apart tom and see what is stuffed i may as well get new lines and slave while i am at it
thanks for the help
jap
Posts: 42
Joined: Tue Jan 15, 2008 12:47 pm
Location: brisbane

Post by jap »

Just pull the master off and when you compress it takes a long time to return is this a problem its not hooked up to anything or is it quicker to return under pressure any help would be great
Post Reply

Who is online

Users browsing this forum: No registered users and 109 guests