Hi, Runnin 35's on a 93 Xtra cab Hilux, 2.8D Turbo. Its had a solid axle conversion. Still got standard diff in rear and a 4.31 diff in front. Wanna convert to 5.29 ratio diffs is this my best option? Its my daily driver, and see's the dirt about once a month. Need a bit more power, and see this as my best option. As towing a camper trailer is a bit of a stuggle sometimes. If ya can help please do so, i'm open for suggestions. Or lead me in the right direction to buy this setup.
Please PM me or sms/call me on 0403211461.
Cheers from Matt.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Hilux 5.29 Ratio
Moderators: toaddog, Elmo, DUDELUX
I run 5.29s and 35s on my truck and i love them makes the car accerate and cruise like it has 31s it does about 2800 at 100k no more changing down for hills on the hiway
good in low range to
I bought mine in the states they were about $200 us an end dont know how the guys in oz justify $500 per end it cost me $200 in freight to brisbane saved $400 for doing absolutly nothing
good in low range to
I bought mine in the states they were about $200 us an end dont know how the guys in oz justify $500 per end it cost me $200 in freight to brisbane saved $400 for doing absolutly nothing
A point to keep in mind is the pinion is tiny on a hilux diff when you run such low ratios.
4.88's i could nurse and get them to last a while, but 5.29's never seemed to last long.
The drivability with 5.29's is awesome though. I wasted a lot of money trying to keep running them.
This was when my surf was running a 2.8 turbo intercooled diesel with 35 claws.
4.88's i could nurse and get them to last a while, but 5.29's never seemed to last long.
The drivability with 5.29's is awesome though. I wasted a lot of money trying to keep running them.
This was when my surf was running a 2.8 turbo intercooled diesel with 35 claws.
Bloody IFS bugger who slows down the SAS boys.
www.vickrawlers.com
www.vickrawlers.com
I had problems with 5.29 braking years ago and I went to 4.88. I've been running the same 4.88 gear set for 6 years. With my 4.88 gear set I have been through 3 Detroit's and I'm not sure how many front and rear axles shafts. Tire sizes from 38" to 40" comp spec tires. After braking an output shaft a few months ago I decided to change over to 5.29. I still haven't done that, its on the to do list. Almost everyone I wheel with now run 5.29 with tire sizes from 35" to 42". I haven't seen any fail and these guys drive there rigs like they stole'em.
Just a little more info for you.
Jason
Just a little more info for you.
Jason
LOCKTUP4X4.COM.AU
LOCKTUPFABRICATION.COM
LOCKTUPFABRICATION.COM
Who is online
Users browsing this forum: No registered users and 1 guest