Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

how do you fit your window nets???

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 675
Joined: Sat Dec 17, 2005 10:06 pm
Location: campbelltown

how do you fit your window nets???

Post by Nat84 »

hi guys
i'm hoping to enter my HJ60 Landcruiser in the Nissan Trials this yr and would just like to know how you fit your window nets to your window frams .....and if you can add pic or 2 that would halp 2

Nat
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Top
Posts: 1095
Joined: Sat Nov 30, 2002 7:53 am
Location: SYDNEY

Contact:
Contact thunder

Post by thunder »

screwed the bottom net into the door(into plastic) and the top is via the
velcro stuff around the top door frame.
Bar work RDG
www.rdgengineering.com
ADRENALIN TRANSPORT
Top
Posts: 37
Joined: Sun May 29, 2005 8:52 pm
Location: Ingleburn

Post by BigRedJeep »

I use velcro straps and cable ties. Does the job just fine.
Find It...............Drive it!!!!
Top
Posts: 1650
Joined: Wed Jun 06, 2007 10:12 pm
Location: ipswich

Contact:
Contact sloshy

Post by sloshy »

thunder wrote:screwed the bottom net into the door(into plastic) and the top is via the
velcro stuff around the top door frame.
x2
cheers Dan

Licenced Carpenter
I do everything, free quotes
Brisbane west/Ipswich/rural
PM me
Top
Posts: 2072
Joined: Sun Feb 11, 2007 4:50 pm
Location: Hobart

Contact:
Contact macca81

Post by macca81 »

curently have the bottom zip tied on, the top has a home made quick release rod that isnt very quick to release (was done because our scrute is a c0ckjaw who rekons its the only way it can be done) will soon have velcro straps instead
[quote="Barnsey"]
Bronwyn Bishop does it for me.[/quote]
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

you might want to check out here http://www.nissanpatrolclub.org/trials/ ... rds-08.pdf .

things have changed this year, the standards say that the net must be easy and quick to remove. there are plenty of quick releases on the market. most are easy to replicate, and they work on a bar along the top that slots into angle steel/alloy, that can slide across and be pulled out easily as it's spring loaded, or have a split pin stopping it sliding. the other design uses a seatbelt like clip.
Spit my last breath
Top
Posts: 851
Joined: Wed Oct 20, 2004 9:41 am
Location: Caboolture

Post by Troll00 »

Cable tie the top to the frame, hockey strap the bottom to the door pad
The Original Massojet
Check you local 4x4/Ray's Outdoors store for stock NOW
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 119 guests