Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Noise from new King springs

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
User avatar
BRT
Posts: 368
Joined: Tue Dec 30, 2003 7:38 pm
Location: Gold Coast

Noise from new King springs

Post by BRT »

About two months ago I upgraded the family camper -91 LWB Petrol Mav
Went to King Springs and got 3' Inch lifted springs and Koni Shocks also got a new set of 33" BFG A/T
Very happy with the setup except when you go over a sharp bump i.e a speed bump the front end gets a "THAWANG" sound. (Only sometimes) sounds like its coming from the springs. Will be taking it back to Kings next week but wondering if anybody has any ideas?
P.S Have also changedall of the bushes as well
Cheers
Darryl ;)
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: Noise from new King springs

Post by bogged »

BRT wrote:.... over a sharp bump i.e a speed bump the front end gets a "THAWANG" sound.



Ok, is it a clunk, does it feel thru the floor of the car at all? They have problems with cracking of the floor in GQ's.

Could be a loose mount or bolt in the front end that they did.... Jump under and check it all out.

Could be body mounts since everything else is new, bushes in front that is... If it happens when one wheel goes first, like left front, then right front, so you would sorta be twisting the car a little, then probably the body mounts.

Could be lots o things, wait to see what The fitter says is the best way...
Top
User avatar
BRT
Posts: 368
Joined: Tue Dec 30, 2003 7:38 pm
Location: Gold Coast

Post by BRT »

it's not a clunk more like the spring recoiling too fast or something like that, i've had a look under it, the mounts are all fine and can't see any signs of the floor cracking. will find out monday i spose
Cheers
Top
Posts: 19062
Joined: Sat Oct 25, 2003 11:39 pm
Location: In a horse near you

Post by chimpboy »

Wild guess is that due to poor mounting (which could be in lots of ways) the spring sits in one spot when not under much tension and then TWANGS into another spot under tension... or vice versa.

As one guy I know says - "always suspect the last thing you did!" In other words, suspect the spring installation rather than a pre-existing problem which the installer probably would have noticed.

Still - yeah, the guy that fitted them will fix it I am sure.

Jason
This is not legal advice.
Top
Posts: 2492
Joined: Sun Nov 24, 2002 8:57 pm
Location: Melbourne

Post by bazzle »

check bottom loop on front springs not hitting 2nd bottom loop.
Alss use an ARB etc urethane packer under bottom of spring on plate as some springs rotate just a little on comp or ext and do make noise said.

Bazzle
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 4 guests