hi all , i have a long history with cars but im new to 4x4's. im just after some info regarding the disassembly and removal of the front diff centre. a search of this board didnt bring up anything relevant.
is it as simple as just unbolting the locking hubs and anything in the way and pulling the axles out? do the axles consist of a shaft with a CV joint on it as i would imagine ? i have removed banjo diffs before but only on fixed axles in the rear of RWD cars, never a 4wd with swivel hubs. vehicle in question is an 89 sierra with standard driveline.
any illustrations and/or reference to relevant information is greatly appreciated .
thanks in advance
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
removing front diff centre
Moderators: toaddog, TWISTY, V8Patrol, Moderators
It's pretty straight forward.
1, Remove the wheels.
2, Remove the brake calipers.
3, Remove the locking hubs.
4, Remove the circlip on the outer end of each axle.
5, Remove the 50mm nuts.
6, Remove the hubs. Be careful not to drop outer bearings.
7, Undo 4 X 14mm bolts that hold backing plates on.
8, Remove CV's and axles.
www.suzukiinfo.com
Jas.
1, Remove the wheels.
2, Remove the brake calipers.
3, Remove the locking hubs.
4, Remove the circlip on the outer end of each axle.
5, Remove the 50mm nuts.
6, Remove the hubs. Be careful not to drop outer bearings.
7, Undo 4 X 14mm bolts that hold backing plates on.
8, Remove CV's and axles.
www.suzukiinfo.com
Jas.
Who is online
Users browsing this forum: No registered users and 2 guests