I am doing a rebuild on my HJ61, and will be running 285x75x16 BFG A/T's on 80 series GXL rims. (I have an axle widening kit)
I am after a solution to correct the speedo. I know that with 31x10.5x15's that the speedo reading is approximately 10klms out at 100kph. (real speed is more like 92-95kph)
Does anyone know of a way to make the speedo more accurate? Are all 80 series electronic speedos, and if not is it possible to fit the early drive gears into a H55F 5 speed transfer case?
Other option is speedo re calibration, has anyone looked into this and if possible, is it economically feasible?
thanks in advance,
MB
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
60 series speedo correction.....
Moderators: toaddog, Elmo, DUDELUX
Ok, just rang Marks Adaptors and they do make a correction unit for 40,45,55,60,62,75 series cruisers (basically any cruiser with the old cable driven speedo).
It is a unit which bolts/screws inline with the speedo cable at the transfer case end, and comes in 3 pre programed ratios: +10%, +12% and +16.5%, these cost $175.00.
If you need a custom ratio, the cost is $195.00.
Considering the price of speeding tickets nowadays, a cheap investment I think.
They said to use a GPS to sit on 100kph, and then get the speedo reading, and work out the ratio from there that you need.
Best I get my finger out and get it all back together.....
It is a unit which bolts/screws inline with the speedo cable at the transfer case end, and comes in 3 pre programed ratios: +10%, +12% and +16.5%, these cost $175.00.
If you need a custom ratio, the cost is $195.00.
Considering the price of speeding tickets nowadays, a cheap investment I think.
They said to use a GPS to sit on 100kph, and then get the speedo reading, and work out the ratio from there that you need.
Best I get my finger out and get it all back together.....
I have a Marks Speedo adaptor on mine. Checked the speed with a GPS and found mine to be out by 20% (35" tyres). Marks did the custom adaptor for me - happy with it.
AKA Mark.
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
1983 HJ60 - 2" OME springs, Bilstein shocks, 2" Bodylift, 35" BFG MT, Twin Lock Rights, Longfields, Denco Turbo, Ironman Winch
1975 FJ55 - stocko, but with power steering!
Who is online
Users browsing this forum: No registered users and 58 guests