alright, seach doesnt work for me anymore, even when i type the word "series" into the toyoya section it says not matches found, fuggit, whatever, thats not my problem...
Just need to be pointed into the right direction...
Problem: over the last few months, the old 60series diesel has been getting smokier and smokier upon startup... This week, still smokier, but definately taking longer and longer to fire, up until now which brings me on here, it wont even start... And im not gunna keep firing away till my batteries die completely...
Any tips... Im sure ive read on here before that the likely problem is injectors, but just wondering other possibilities and what i could try now to get the crunt started...
Many thanks in advance...
Leeroy.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Have 60series, Wont Start *fixed, with pics*
Moderators: toaddog, Elmo, DUDELUX
Have 60series, Wont Start *fixed, with pics*
Last edited by vanzbrown on Wed Aug 20, 2008 12:36 pm, edited 1 time in total.
ok, found this in another section. Seems it could apply to me, as it did seem to start a lot rougher on cold mornings...
Shadow wrote:Tested my glow plugs on the weekend and found that one was fubarred. replaced it with a Bosch unit ($15 repco) and she starts so much better now. previously it would blow a crap load of white smoke and miss and carry on for about 20-30 seconds. now it starts buetifully again. Cant believe the difference it made!. Reason i suspected a glow plug was because it started much better during summer and i didnt think the engine could have degraded so much so quickly.
is it worth while replacing all the plugs? the others tested fine. All read around the 0.2 ohm mark. Did not think to compare the bosch glob plug's resistance, but figure it would be different anyway being a different brand.
Ok, well, i started thinking about glowplugs, and took out the first one to have a look, tested it using two bits of wire and the battery, looked ok, then once i had put it back in i looked along the rail and seen the rear glowplug. How i didnt notice this first i dunn...
10seconds before i took the pics, that arm was joined by the smalled piece of corroded metal, and no sooner had i touched it, it broke clean out... Im guessing it was melted like that due to it arc'ing out from the corrosion?
So i went about taking the corroded arm off the back, inturn snapping the top of the rear glowplug, no biggy, looked like it could do with replacing anyways.
Having never realy taken glowplugs out before, is it normal for them to be that oily?
So, with a few new parts, she fired straight up, and with not nearly as much white smoke upon startup that id been experiencing over the past week..
10seconds before i took the pics, that arm was joined by the smalled piece of corroded metal, and no sooner had i touched it, it broke clean out... Im guessing it was melted like that due to it arc'ing out from the corrosion?
So i went about taking the corroded arm off the back, inturn snapping the top of the rear glowplug, no biggy, looked like it could do with replacing anyways.
Having never realy taken glowplugs out before, is it normal for them to be that oily?
So, with a few new parts, she fired straight up, and with not nearly as much white smoke upon startup that id been experiencing over the past week..
Last edited by vanzbrown on Wed Aug 20, 2008 1:43 pm, edited 1 time in total.
when i stripped down my 40 series 2h with 350k on the clock i found quite a few things wrong valve stem seals perished and bits of them missing at least 4 cylinders with cracked rings bores scrached to all buggery but it still went ok ran smoth enough after the rebuild it s a rocket know helps with a hair dryer on the side 
X2AZZA'S HJ47 wrote:when i stripped down my 40 series 2h with 350k on the clock i found quite a few things wrong valve stem seals perished and bits of them missing at least 4 cylinders with cracked rings bores scrached to all buggery but it still went ok ran smoth enough after the rebuild it s a rocket know helps with a hair dryer on the side
does yours do this if so you would have a case of blow-by like mine
my 2H al so has 360.000 on the clock and turbo
http://www.youtube.com/watch?v=FDeixjGHhpU
Tires are like boobs, they always look big until you have played with them for a while, then you just want a bigger set
Who is online
Users browsing this forum: No registered users and 155 guests