Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

seatbelt retracting fix.

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

seatbelt retracting fix.

Post by Dee »

Read in another thread that patrol owners stick a zip-tie around the belt at the shoulder swivel to stop it retracting when on cambers/angles when offroading…
Anyone know if this or any other tricks/tips to set the seatbelts at a set length will work in a zuk and stop them retracting so they can be put back on easily? (short of replacing them with non-retractables or a harness?)
All the gear, No idea...
User avatar
cj
Posts: 1913
Joined: Tue Jul 01, 2003 10:30 pm
Location: Melbourne

Post by cj »

Clothes pegs or bulldog clips work and are cheap but I bought some plastic seatbelt clips from Autobarn a few years back for a few dollars. They can't get knocked off by accident. I think they were Matrix.
[quote="4WD Stuff"]
I haven't quoted Grimbo because nobody takes him seriously :finger: :finger: :finger: :finger: [/quote]
Posts: 813
Joined: Wed Aug 18, 2004 10:21 pm
Location: Hobart

Post by Spike_Sierra »

i used to work at a department store so i knocked off a security tag(a pin and a big button looking thing) so it cant get retracted, only problem is getting one :P

edit for below post: put it somewhere in between the retractable length so it doesnt interfere with the belts safety features. For easy removeable, use a clothes peg.
Last edited by Spike_Sierra on Fri Aug 22, 2008 6:36 pm, edited 1 time in total.
85 LWB w. FRP Canopy
Ca18det conversion in progress, Vit PS, RUF,
6.5:1's, 33x12.5 Bfg's, custom front and rear bars.
Posts: 152
Joined: Thu Jul 05, 2007 9:21 pm
Location: Wollongong NSW

Post by gman79au »

just make sure you can remove them quickly, there are illegal, not sure if cops will look for them but its a pinkslip fail
User avatar
Dee
Posts: 2314
Joined: Thu Mar 10, 2005 1:35 pm
Location: Sunny Coast, QLD

Post by Dee »

gman79au wrote:just make sure you can remove them quickly, there are illegal, not sure if cops will look for them but its a pinkslip fail
only need em for wheeling...
All the gear, No idea...
Posts: 71
Joined: Sat Aug 04, 2007 8:38 pm
Location: Sydney

Post by spzook »

does anyone know how to 'unlock' seatbelts. they have been taken out of the zook and now i cant get them to pull back out.
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

f

Post by Pyrotech »

gman79au wrote:just make sure you can remove them quickly, there are illegal, not sure if cops will look for them but its a pinkslip fail
is this speaking from experience?
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

spzook wrote:does anyone know how to 'unlock' seatbelts. they have been taken out of the zook and now i cant get them to pull back out.
The locking mechanism works two ways.
1, It locks the belt when you try to pull it out quickly.
2, It locks the belt when the vehicle is on an angle.

Hold the retractor reel upright as it would be in the car and pull slowly, the belt should unreel as usual.
Jas.
Posts: 19
Joined: Wed Jan 02, 2008 10:15 am
Location: melbourne, east suburbs

Post by chris.e »

You can get belt locking device from a baby shop that sells safety capsules and such, they look like a 3 pronged fork, i have seen them made from plastic and pressed metal, hope this helps.
Posts: 1391
Joined: Fri Aug 13, 2004 9:42 pm
Location: Newy

D

Post by Pyrotech »

Im guessing it locks onto the two belts just infront if the loop part on the B piller?
im might have to mod me up a fork
Zooks are for people that aren't afraid of angles and who have nothing to compensate for

[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Post Reply

Who is online

Users browsing this forum: No registered users and 79 guests