Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear Axle Seal, again?

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 20
Joined: Fri Aug 22, 2008 9:32 pm
Location: Melbourne

Rear Axle Seal, again?

Post by 4runnerJonno »

Hi,

I had a leaking rear axle seal on my 84 4runner. After having seals and bearings replaced less than 5000 k's ago it is leaking again.

I have checked the diff breather and it was resting against something that was holding it closed and I guess this is what caused it.

Does this mean I need to get a new seal pressed in or can I fix it/re-seal it some how?

Any help or ideas would be appreciated

Jonno
Top
Posts: 207
Joined: Thu Sep 20, 2007 4:37 pm
Location: victoria

Post by johno88 »

So i take it that diff is still leaking after you unblocked it? if it still leaks i would say its fuck and you need another seal, Im pretty sure your talking about the pinion seal and they are about 6 bucks and pretty simple to replace.
Top
Posts: 156
Joined: Mon Nov 06, 2006 2:09 pm
Location: Southside, Brisbane

Post by Rilux »

Unblock your breather, clean the leak, if it's still leaking then yes you need a new seal. Sometimes they stop leaking when the breather is cleared, more often not tho.
Some say he knows two facts about ducks...and they're both wrong.
Top
Posts: 1490
Joined: Thu Nov 28, 2002 12:53 pm
Location: Brisbane - D'Bay

Post by Willy Hilux »

Put a speedi sleeve on the shaft surface if its ya pinion seal.
Put grease in the seal groove before fitting shaft.
AMADAXTREME Racing
Sponsors-
AmadaXtreme
Superior Engineering
www.superiorengineering.com.au/
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest