Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I survived New Years at Bright - great time wa had at FatHillBilly's pad!
On the way up and back - I noticed a few new noises from the rear end...
When the clutch was engaged - there is a ting - then as you back off and hold gears its like a tic tic tic noise - yeah I know - I'm being ubertechnical here but thats what happening.
I checked the uni's - they were a little worn in the rear about 1-2mm slop between the pinion and shaft at the rear - also the pinion seal has gone as well - heaps of trcikle there too...
Anyone got some ideas? and there aren't any rocks caught in the disc protetctors either...
PS - I'm surprised how well I typed this up...all things considered!!!
80 Series Turbo - the Toy car...
XR6 Turbo - the work car...
XW wagon - the dogs car...
haha, yeah mines doin that too, the whole 'ting' bit i have a bit of play in my splines but i think its something to do with the diff as i blew one up and it only started doin it after i put the new one in. it could be just the tailshaft tho as ive pulled it on and off so many times its not funny. changing seals and engine/gearbox.
i have a bit of play in my splines but i think its something to do with the diff as i blew one up and it only started doin it after i put the new one in. it could be just the tailshaft tho as ive pulled it on and off so many times its not funny. changing seals and engine/gearbox.