Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HZJ75 Cruiser rim options.

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

HZJ75 Cruiser rim options.

Post by Dane »

I am changing from 7.50 x 16 splitties to tubeless tyres on the Cruiser and want to run a 7 x 16 steel rim with some negative offset to widen the track a bit while I'm at it. I have looked into new steel wheel manufacturers but can only get about 6mm neg offset per wheel and I would prefer more.

So I'm after suggestions for a tough, good looking factory steel wheel in 7 x 16 six stud Landcruiser pattern, that has some negative offset. A photo would be great if you could include one with your suggestions.
Top
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

Post by Dane »

:cry: Carn guys...
Top
Posts: 1109
Joined: Mon Feb 12, 2007 8:48 pm
Location: Australia

Post by hulsty »

Any particular reason you want to stay with a 16x7 ?

Just that there is an abundance of cheap 15x8 rims about with a -23ish offset and tyres for that size rim are pretty cheap too.
Top
Posts: 243
Joined: Thu Jul 15, 2004 9:21 am
Location: Townsville

Post by Dane »

G'day hulsty, I want to stay with a skinny tyre and have already chosen what tyres I am going to buy, which are pretty cheap. 8 inch is too wide and I don't think you can get skinny, tall tyres in 15 inch although I have not researched that.
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 2 guests