MQ SWB body on a GQ Chassie?

[RUFF]

Is this a straight bolt up job? Not concerned about wiring or anything else. Just wether the body bolts straight on or if not what mods need to be done.

[Bartso]

i don't think they are

i think some one already asked this somewhere in here

[mikesmith]

hey ruff just done this

the last 2 bolts that u get to thru the cabin behind the seats will fit with a little bit or grinding the hole bigger on the chassis.

the middle 2 i made a mount up for because they are about 50mm away and the same with the front.

thats a swb mq cab which i cut into a ute onto a LWB gq chassis.

so no not a straight bolt on.

also need to trim around the front inner guards to clear shock towers and chassis! will need to cut the floor to if u intend to run the gq gearbox also. will need a lot cut out if no bodylift around the gearbox.

[RUFF]

hey ruff just done this

the last 2 bolts that u get to thru the cabin behind the seats will fit with a little bit or grinding the hole bigger on the chassis.

the middle 2 i made a mount up for because they are about 50mm away and the same with the front.

thats a swb mq cab which i cut into a ute onto a LWB gq chassis.

so no not a straight bolt on.

also need to trim around the front inner guards to clear shock towers and chassis! will need to cut the floor to if u intend to run the gq gearbox also. will need a lot cut out if no bodylift around the gearbox.

Thanks. It doesnt have a Nissan motor or box fitted.