Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Cheap winches

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Posts: 1076
Joined: Tue Jul 27, 2004 8:49 am
Location: cashmere

Post by eliteforce32 »

do it and then ill give u a box of piss for the winch ;)
Eliteforce Heavy Fabrication
Proud supporter of these businesses:-
Pig Dog Shop(hunting)- Greg 0448024776
CrispProducts(Racetec Gauges)-Chris(pm him)
Fourbies at Moorooka- Ryano
Posts: 2600
Joined: Thu Sep 27, 2007 2:40 pm
Location: Townsville

Post by GRPABT1 »

want33s wrote:
GRPABT1 wrote:Why the hell would you need a 12000 pound winch? I highly doubt a zook's thin chassis would appreciate the full brunt that a 12000 pounder could produce.

Get a Tmax, for the price you can't beat them.
I don't know about you but I have mates and most of them don't have Zooks they have Cruisers and Patrols and when they get stuck I pull them out. :finger: I never wanted a Zook only winch that I would burn out saving a bigger car.
The 12000lb winch is actually lighter than my 9500lb and has a faster line speed.
My point was that when you have your zook parked up against a tree or whatever to anchor it to rescue your mates, a 12000lb winch could potentially damage your chassis. You know how thin a zook chassis is.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

Got the motor back today.
One of the 4 coils in the housing had burnt out.
They couldn't give a better explanation as to why it happened than "Sometimes they just go".
$176 later and I have a winch again. :lol:
Motor is sealed on this time just in case water had something to do with it.

Jas.
Posts: 853
Joined: Fri Feb 10, 2006 6:38 pm
Location: Newcastle

Post by Mick. »

Disco1Modified wrote:If you go into Autobarn and look in the car audio section they have lots of high current fuses for the doof-doof guys and their audio power amps. They have an in-line fuse holder with a 250 amp fuse (nice and wanky clear perspex holder with gold plated terminals. I used a 400amp fuse - they are used in forklifts. I don't have any photo's just yet. The fuse holder andd fuses were not that expensive.
Your talking about one of these. This holds a 400amp gold plated fuse which I run all my electrics threw.

Image

Cheers Mick.
Posts: 49
Joined: Tue May 22, 2007 3:21 pm
Location: Melbourne Australia

Post by Disco1Modified »

Mick, that's the one.
Toy 100 series now with a few mods

Disco1 with lots of mods - lift, locked and loaded. (sold)
Post Reply

Who is online

Users browsing this forum: No registered users and 135 guests