Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Tailshafts???

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 71
Joined: Sat Aug 04, 2007 8:38 pm
Location: Sydney

Tailshafts???

Post by spzook »

i just put the transfer in my ute after finally sourcing the correct mounting bracket for it. i then tried connecting the driveshaft from the gearbox to the transfer and the 4 bolt holes that join the two didn't line up.

the driveshaft and tailshaft holes are about 52mm centre to centre with 8mm bolts. NT.
all 3 transfer mounts are about 55-56mm centre to centre. also 8mm bolts. which i was told is a 1L.
also have some WT tailshefts which are 60mm centre to centre with 10mm bolts.
checked tailshafts and diff mounts on the donor car and they too are 52mm centre to centre.
does anyone know what the deal is with the transfer.

left one is WT. right is NT.
Image
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Mate I think , maybe you can just swap the slip joint end on each shaft to give you 1 litre flanges for the transfer case , if not you will need to swap flanges only , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Posts: 71
Joined: Sat Aug 04, 2007 8:38 pm
Location: Sydney

Post by spzook »

hey paul,
thought about doing that but the 1L slip joint end still doesn't fit the transfer. the holes are just out.
does anyone know if it would be possible to re-drill new holes in the transfer flanges to accept the NT shafts?
also are NT diff centres a straight swap into WT diff centres?
cheers
Top
Posts: 870
Joined: Sat Jun 03, 2006 5:32 pm
Location: sydney

Post by MART »

Turn the tailshaft arround and have the slipjoint at the bottom , mine are , Cheers Paul.
BLOWNZUK 1.3 efi,sc14 supercharger,hilux diffs,detroit lockers,stage 4 rockhopper,6 point cage,35 muddies.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 41 guests