Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
35,s
I have the exact same setup, 2 inch spring, 2 inch body. my 33's already scrub all the time so there's no way 35's are gonna fit without some guard cutting. as for the power issue i'm sure you're already painfully aware of the high ratio of 4lo in the patrols, inctreasing the rolling diameter is going to add to that, but if you've got the coin to make the 35's fit why not get reduction gears? All i've done is keep the 33's so it still tows my boat, and air locked the front, sliders and about to do a rear bar. I hit a bit but no more than my mates with 35's. hope this helps.
Who is online
Users browsing this forum: No registered users and 79 guests