Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

impco 200 / 225 mixer

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 127
Joined: Wed May 02, 2007 12:08 am
Location: west gippsland

impco 200 / 225 mixer

Post by narns1mav »

what does the bal port get connected to
Top
Posts: 321
Joined: Sat Jul 30, 2005 10:14 pm
Location: Canning Vale, W.A

Post by Patchy »

usually the air box before your filter, or the air intake snorkel.
Top
Posts: 127
Joined: Wed May 02, 2007 12:08 am
Location: west gippsland

Post by narns1mav »

is it needed or can it be blocked off
Top
Posts: 810
Joined: Tue Jul 08, 2008 8:40 pm
Location: vic

Post by ajsr »

pretty sure it needs to breath
pm slyvan1 he fits gas
85 high roof 1.3, 6.5 tc, air lockers,ruf and 34 swampers. yep its an ugly pos.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

which is it? 200 or 225?

i've only got experience with a 200, but mine wouldn't run with the balance line connected. disconnected, all good.

pretty sure it's only really needed if there is a larger than normal pressure difference between the mixer and "normal" (i.e. in a turbo application, or due to a cold air intake/air ram.
Spit my last breath
Top
Posts: 127
Joined: Wed May 02, 2007 12:08 am
Location: west gippsland

Post by narns1mav »

ive got 1 of each and they both have the bal port on them
Top
Posts: 612
Joined: Wed Feb 11, 2004 6:50 pm
Location: Perth / Laverton

Post by Zeyphly »

are you running a snorkle? If not just leave them open to atmosphere
03 turbo twin cab hilux + 85 xtra cab 253, Have i ever said i love lockers?
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

The fitment of a balance line is required with a snorkel, it's fitment will also tend to lean the mixture right out so re-tuning is required.

Cheers

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Posts: 127
Joined: Wed May 02, 2007 12:08 am
Location: west gippsland

Post by narns1mav »

so where on the snorkle would i connect it to i thought it was the converter that had to be connected to snorkle not the mixer
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 1 guest