Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Any experience with a programmable ECU in a 6g74 3.5 V6 SOHC

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 40
Joined: Sun Aug 12, 2007 3:29 am
Location: Chile, South America

Any experience with a programmable ECU in a 6g74 3.5 V6 SOHC

Post by caxtrol »

Hi friends

I am collecting information about the programmable ECU performance, somebody has a experience with Motec, Autotronics, or other aftermarket brand ??

If you have information or experience, may you share it.

Thanks

Caxtrol
Top
Posts: 40
Joined: Sun Aug 12, 2007 3:29 am
Location: Chile, South America

Post by caxtrol »

Any experience ??

Thanks

Caxtrol
Top
Posts: 27
Joined: Wed Aug 30, 2006 10:45 am

after market ecu

Post by blown26paj »

ems seems to be the best value for money in aus not to hard to wire if you have some understanding how they work.Why do you want to do this have you modified the engine ? If not the expence of purchasing,setting up wiring,dyno would be a lot of money for the amount gained.
supercharged nb paj swb f&r lockers,3.0 nh paj swb arb lockers,nl lux pack 2.8 paj lwb front locker
Top
Posts: 40
Joined: Sun Aug 12, 2007 3:29 am
Location: Chile, South America

Post by caxtrol »

Hi blown26paj

I have a cousin that have a garage with a Dyno a very good mechanics, He has 2 rally car in Chile (Subaru STI), and the other day he told me the possibility to play with the electronic in my Mitsu (the mechanis have a lot of experience with electronic in special with a programable ECU), for this reason I am collecting info about it in the forum.

I have the mechanics with the experience and the Dyno, now I need to find the new ECU.

If somebody has experience, please share with me.

Thanks

Caxtrol
Top
Posts: 102
Joined: Mon Apr 18, 2005 9:55 pm
Location: Greece

Post by constapa »

I have this one... Excellent value for money. It does the same things with others that cost 3 times more.

http://kms.vankronenburg.nl/

You have to know that the most difficult part is not making the main program for the engine load (many people can do that). It is the tuning of all the parameters needed for cold start, warm start etc. that make the engine working like the factory setup.
Pajero '87 soft top, 2.6L turbo EFI mod, ARB locker, 2" lifted OME, 31's M/T
Top
Posts: 234
Joined: Tue Apr 03, 2007 7:05 pm
Location: Melburn!

Post by Dexter »

constapa wrote:I have this one... Excellent value for money. It does the same things with others that cost 3 times more.

http://kms.vankronenburg.nl/

You have to know that the most difficult part is not making the main program for the engine load (many people can do that). It is the tuning of all the parameters needed for cold start, warm start etc. that make the engine working like the factory setup.
Your too right there, cold start is a pain to tune.
Top
Posts: 400
Joined: Fri Jan 03, 2003 12:42 pm
Location: Braidwood , NSW

Post by Ian Sharpe »

Mate, I had a dual map UniChip in my NK when I had it on gas, despite the dyno saying power was up, I couldnt feel any difference, waste of money IMO.

Get a locker instead!
NL 3.5l auto with front & rear lockers,winch, custom 3.15 T/C gears
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 10 guests