Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Removing Sierra Windscreen Wipers

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 242
Joined: Fri Nov 17, 2006 10:27 am
Location: Perth, WA

Removing Sierra Windscreen Wipers

Post by croatian4x4 »

Ok guys please help..

I am trying to remove the windscreen wipers on my 1991 Sierra. I have removed the 10mm nut from the outside of the wiper.. I thought once this is done that the wiper just pulls off, but the bloody thing wont..

Is there any special way of getting these damn things off without ripping a hole in the surrounding tin...?

Thanks in advanced,
CW
Top
Posts: 13555
Joined: Fri Nov 15, 2002 1:28 pm
Location: Melbourne

Post by grimbo »

WD40 and abit of patience
Ransom note = demand + collage
Top
Posts: 242
Joined: Fri Nov 17, 2006 10:27 am
Location: Perth, WA

Post by croatian4x4 »

grimbo wrote:WD40 and abit of patience
Ive tried. I soaked them in lube (not the intimate type :P), tried prying them off, tried tapping them off but the pricks wont budge....
Top
Posts: 264
Joined: Sun Sep 23, 2007 1:05 pm
Location: SE Melbourne

Post by Pezooki »

The wipers on my 91 Sierra were a prick too - as Grimbo said, WD40 and a bit of patience is required.

I had to soak them in WD40, then pry, lever, hit, and pull the bloody things off. A big flat blade screwdriver will be your friend. Eventually I got them off with out damaging them.

Good luck!

Pez
91 Sierra soft-top. My Members thread: http://www.outerlimits4x4.com/viewtopic.php?f=16&t=169128
Top
Posts: 838
Joined: Wed Apr 28, 2004 10:00 pm

Post by Wesley »

I just used a twin leg puller to get mine off.
Image
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

There is a trick to it... They are held on by the nut and a taper similar to a tie rod/ball joint.
Remove the nut and then raise wiper to fully up position.
Push the arm toward and away from the windscreen.
Should break the taper hold and fall off and scratch your paint. :?

Jas.
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest