lj80 front axle

Post by **T-rex** » Wed Sep 03, 2008 9:38 pm

just wanted to know if anyone out there had any they wanted to part with,
posted in the wanted section but not sure if everyone looks there.welded up the front and it twisted off just behind the cv first outing. it necks down to about 20mm, can anyone tell me what the spline count is that go's into the seirra cv's
cheers Troy

Post by **T-rex** » Thu Sep 04, 2008 5:05 pm

just a few photos for those who dont know what an LJ80 is.
And on the axle question, does anyone know what the slpine count is on a Sierra? The end that goes into the CV. The spline count on the LJ that goes into the CV is 19.

Post by **3 cyl** » Thu Sep 04, 2008 7:57 pm

They are the same spline as a Sierra.

Post by **Mudbits** » Fri Sep 05, 2008 2:33 pm

We should have a few here but they are not labeled. Could you please tell me the length so i can look next week?

Post by **3 cyl** » Fri Sep 05, 2008 4:10 pm

Looks like you already have 1 liter Sierra CV's as you have freewheeling hubs.

Post by **T-rex** » Fri Sep 05, 2008 6:32 pm

yeah its had the whole knuckle replaced got the disk brakes to.
the axle lenghth is about 500mm long, and about 665mm with the cv fitted.
[/quote]
i would of thought the sierras had a larger spline into the cv, atleast the 1.3s. why would you change your side gears and go up to 26mm spline only to have it neck down to 19 spline(20mm) at the cv. or are the cro-mo
ones bigger

Post by **Mudbits** » Thu Sep 11, 2008 7:29 am

Hi,

I have one here 501mm long with 19 spline one end and 22 spline the other.
Is this what you need?

Post by **T-rex** » Thu Sep 11, 2008 7:49 pm

yes mate thats the one. how much you want for it? and would you be able to send it to OZ
thanks Troy

Post by **Mudbits** » Fri Sep 12, 2008 8:30 am

You have mail.

Outer Limits 4x4 Board

lj80 front axle

lj80 front axle

Who is online