I was actually thinking this myself, but wasn't sure if it happened on Suzukis. I've ever only seen it on the old m20 and m21 Holden boxes. I had a 308 Torana it used to happen to all the time. The only way I could get that thing to go back into gear was to selct 1st and drop the clutch. Used to let out an almighty bang, but it worked.Gwagensteve wrote: B) If the box is jammed, it's possible you've pulled 2 gears at once. I've had this happen to me. From memory "neutral" was 4th and I couldn't get anything except reverse which just jammed the box and stalled the car. Seen it happen with a cruiser too.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Sloppy shifter fix
Really? The ONLY way?
I don't think I'd do that. popping all the the rails back into neutral has worked for me.
Steve.
I don't think I'd do that. popping all the the rails back into neutral has worked for me.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I've struggled and sturggled and to no avail can I move those bastards. I can bolt the shifter back in and it only moves side to side between the two rails on the right but neither will move back or forwards (it just bends the shifter). With the shifter off I have tried moving them with various tools, the best I found was a socket extension Bar which slots in nicely to the groove but still wont budge. I have tried rocking it back and forwards in high and low and starting it in gear and dropping the clutch.
Looks like a new box for me. I just rang one bloke who quoted $550 for a "good second hand" box, anyone know somewhere cheaper? Or should I be getting mine repaired?
Also how hard are they to replace (*looks up workshop manual*) as I have never removed a gearbox before or changed a clutch, do I have to stuff around with the clutch at all?
Looks like a new box for me. I just rang one bloke who quoted $550 for a "good second hand" box, anyone know somewhere cheaper? Or should I be getting mine repaired?
Also how hard are they to replace (*looks up workshop manual*) as I have never removed a gearbox before or changed a clutch, do I have to stuff around with the clutch at all?
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
The box will come out and go back in without need to touch the clutch. The only thing you will need to do is drop the cable off. It might pay to drop the clutch out anyway to check it, cos it's a bit of work to get the box out.
It sounds like the box needs to come apart. One of the detent balls may have come adrift and jammed the linkages? Or something has broken internally. It would be interesting to split the box to see what has gone wrong once you have swapped.
There are second hand boxes around cheaper than that, they usually go for around the $150 mark privately (unknown condition and no warranty though)
It sounds like the box needs to come apart. One of the detent balls may have come adrift and jammed the linkages? Or something has broken internally. It would be interesting to split the box to see what has gone wrong once you have swapped.
There are second hand boxes around cheaper than that, they usually go for around the $150 mark privately (unknown condition and no warranty though)
ok well all is well. With more time to think about it I thought if it's in 5th it's gotta be the left rail. out not the other two. I hadn't touched it thinking it was reverse and not wanting to jam it in reverse. So I pushed it forward (easy) and it's now in nuetral 
Re-greasing shifter and locktighting all bolts as that was the problem, bolts came loose.
Re-greasing shifter and locktighting all bolts as that was the problem, bolts came loose.
Build Thread - http://www.outerlimits4x4.com/viewtopic.php?f=16&t=168546&p=1927514&hilit=GRPABT1%27s+zook#p1927514
Yep got one mate (I make them) but I am northside Brisbane. Welcome to come over and get one. Pm me for addressislandvitara wrote:can anyone in brissy please help me! urgently need a sierra gear shifter bush TODAY ASAP! im using duct tape as a makeshift bush mine snaped last night at cityview 4x4 park :( PLEASE CALL 0431917144 if u can help even a 2nd hand bush wil do!
"Team Casper"
Go the mighty Zook
The only motor sport we spend money on to go slower.
Go the mighty Zook
The only motor sport we spend money on to go slower.
Who is online
Users browsing this forum: No registered users and 7 guests