Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Rear Bumper

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 11
Joined: Tue Aug 28, 2007 7:44 pm
Location: Perth

Rear Bumper

Post by cooky2511 »

Has anyone made, or know of someone who has made a custom rear bar for NH Pajero to replace the old crappy plastic one?
Top
Posts: 5
Joined: Tue Jul 01, 2008 7:08 am
Location: uk

Post by subzeroac »

this is what ive just made up for mine it will house my 12,000 winch


Image


Image
Top
Posts: 11
Joined: Tue Aug 28, 2007 7:44 pm
Location: Perth

Post by cooky2511 »

I wondered what that box bit was for. Thats a big winch for the rear :)
Looks good. What about up the side of the car behind the back wheels.
Will you do anything there?
Top
Posts: 5
Joined: Tue Jul 01, 2008 7:08 am
Location: uk

Post by subzeroac »

im looking at trimming the 1/4 panel up then maybe an external cage
Top
Posts: 62
Joined: Mon May 12, 2003 8:54 pm
Location: Wollongong

Post by revnkev »

There are some pics of mine towards the bottom of the gallery page
on my website.(link is in my sig) It's made from heavy wall gal pipe,
75 x 50 gal RHS and 12mm plate .The rear sills have been trimmed
about 100mm.It is heavy,but it's good and solid :)
Good luck with yours.
Kev.
95 GLX LWB 2.8lt ITD Pajero
Custom Rear Bar & Rockslides
33x12.5 MTZ's ,TJM XGS shocks,Rear Airbags
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests