Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
leaf to coil conversion
Moderator: -Scott-
leaf to coil conversion
after looking at some of the post. have got inspierd to convert my l200 rear from leaf to coil rear. has enybody done it to a triton or pajero before. need to get some advice before starting. any advice would be greatfull
l2oo mitzi 2in lift shortend tray 31mudders
Maybe best to explain what you want 1st.
To improve ride and not worry about carring big loads, take out a load leaf. This will help it flex.
To make it flex well and get a nice ride keep the leaves but put some nice loooong ones in there.
It takes a bit of work to get a rear setup to work well. Radius arms can work well but flex is limiting.
To improve ride and not worry about carring big loads, take out a load leaf. This will help it flex.
To make it flex well and get a nice ride keep the leaves but put some nice loooong ones in there.
It takes a bit of work to get a rear setup to work well. Radius arms can work well but flex is limiting.
1994 NJ SWB, 3.5, 5 speed manual, 33's, XD9000, 4.9 diffs, Front & Rear ARB's, Safari Snorkel
2008-2009-2010-2011 Pavlova in the shed.
2008-2009-2010-2011 Pavlova in the shed.
Who is online
Users browsing this forum: No registered users and 0 guests