Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

FJ60 Gearbox - Will HJ 60 / HJ 75 Fit ??

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 15
Joined: Sat Sep 13, 2008 8:46 pm
Location: North Brisbane

FJ60 Gearbox - Will HJ 60 / HJ 75 Fit ??

Post by Petrol60 »

Hi Guys, long time lurker first timne poster.

I have a 1983 FJ 60 with a 2F engine on gas. The 5 Speed has just shit itself and I need to get it back on the road ASAP.

A guy up the road has one forsale from a HJ60 / 75 that he says will fit if I swap my bell housing onto it.

Can anyone confirm this is the case ? Or will I have to dick around with input shafts and clutches ?

Any help would be great.
Top
Posts: 6029
Joined: Tue Dec 24, 2002 9:34 pm
Location: South Australia

Post by bad_religion_au »

it's true. it.ll work no drama's.4 bolts to undo it from the bellhousing, drop it, put the new one in (remove your shifters, reverse light wiring and speedo cable too)
Spit my last breath
Top
Posts: 19
Joined: Wed Apr 16, 2008 8:02 pm
Location: Port Campbell

Post by 12HT-HJ61 »

As bad relgion says it will fit ,very straight forward but you MAY have to swap the tailshaft flanges on the transfer case depending on which bolt pattern tailshafts you have,but if so its just as easy as the rest of the job.
Top
Posts: 15
Joined: Sat Sep 13, 2008 8:46 pm
Location: North Brisbane

Thanks

Post by Petrol60 »

Hi Guys,

Thanks for the info
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 88 guests